V0.2.3

I didn't find other solutions on the Internet.
I found the plugins are loaded when creating MainWindow,
so this solution should be fine?

.gitignore

@@ -14,7 +14,6 @@
 *.so.*
 *_pch.h.cpp
 *_resource.rc
-*.qm
 .#*
 *.*#
 core

LICENSE

@@ -1,21 +1,504 @@
-MIT License
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
 
-Copyright (c) 2020 wh201906
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
 
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
 
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
+                            Preamble
 
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301
+    USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random
+  Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!

Proxmark3GUI.pro

@@ -16,9 +16,11 @@ DEFINES += QT_DEPRECATED_WARNINGS
 #DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000    # disables all the APIs deprecated before Qt 6.0.0
 
 SOURCES += \
+    common/myeventfilter.cpp \
     main.cpp \
     common/pm3process.cpp \
     common/util.cpp \
+    module/lf.cpp \
     module/mifare.cpp \
     ui/mf_trailerdecoderdialog.cpp \
     ui/mf_sim_simdialog.cpp \
@@ -27,8 +29,10 @@ SOURCES += \
     ui/mf_attack_hardnesteddialog.cpp \
 
 HEADERS += \
+    common/myeventfilter.h \
     common/pm3process.h \
     common/util.h \
+    module/lf.h \
     module/mifare.h \
     ui/mf_trailerdecoderdialog.h \
     ui/mf_sim_simdialog.h \
@@ -52,7 +56,7 @@ qnx: target.path = /tmp/$${TARGET}/bin
 else: unix:!android: target.path = /opt/$${TARGET}/bin
 !isEmpty(target.path): INSTALLS += target
 
-VERSION = 0.1.2
+VERSION = 0.2.3
 QMAKE_TARGET_PRODUCT = "Proxmark3GUI"
 QMAKE_TARGET_DESCRIPTION = "Proxmark3GUI"
 QMAKE_TARGET_COMPANY = "wh201906"

README.md

@@ -1,7 +1,9 @@
 # Proxmark3GUI
-A GUI for [Proxmark3](https://github.com/Proxmark/proxmark3) client
+![downloads](https://img.shields.io/github/downloads/wh201906/Proxmark3GUI/total)  
 
-[中文](README/doc/README_zh_CN.md)
+A cross-platform GUI for [Proxmark3](https://github.com/Proxmark/proxmark3) client
+
+[中文介绍](doc/README/README_zh_CN.md)
 
 ***
 
@@ -17,45 +19,99 @@ A GUI for [Proxmark3](https://github.com/Proxmark/proxmark3) client
     + Support binary(.bin .dump) files and text(.eml) files
     + Analyze Access Bits
     + Support Chinese Magic Card
++ Have basic support for LF commands
 + Customize UI  
 + ...  
 
 ***
 
 ## Preview
-![preview](README/img/preview.png)  
+![preview](doc/README/preview.png)  
 
-more previews [here](README/doc/previews.md)  
+[more previews](doc/preview/previews.md)  
 
 ***
 
 ## About Iceman fork/repo
 
-The [Iceman fork/repo](https://github.com/RfidResearchGroup/proxmark3) has more powerful functions like offline sniff. These guys even developed a new hardware called Proxmark3 RDV4 with smart card support. But the official repo and the Iceman repo is not fully compatible.  
-This GUI was designed for only official repo at first, but I'm trying to make it compatible with Iceman repo.  
-
-Supported functions when using Iceman client:  
-
-[supported functions](README/doc/supported_Iceman.md)  
+The [Iceman fork/repo](https://github.com/RfidResearchGroup/proxmark3) has more powerful functions. These guys even developed a new hardware called Proxmark3 RDV4 with smart card support. But the official repo and the Iceman repo is not fully compatible.  
+This GUI is compatible with Iceman/RRG repo(tested on v4.13441)  
 
 ***
 
 ## About Compiled Windows clients
 
-A cool guy [Gator96100](https://github.com/Gator96100) creates [ProxSpace](https://github.com/Gator96100/ProxSpace) and makes it possible to compile both the firmware and client on Windows.  
-Also, he makes the [pre-compiled Windows client](http://www.proxmark.org/forum/viewtopic.php?id=3975) so you can download it and run your PM3 client on Windows instantly.  
+A cool guy [Gator96100](https://github.com/Gator96100) creates [ProxSpace](https://github.com/Gator96100/ProxSpace) and makes it possible to compile both the firmware and the client on Windows.  
+Also, he makes the [pre-compiled Windows client](https://www.proxmarkbuilds.org/) so you can download it and run your PM3 client on Windows instantly.  
 I included his compiled client in my releases so you can use the GUI on the fly, and you can also use the GUI with your prefered client.  
 Great thanks to him.  
 
 ***
 
+## Build on Linux
+
+    cd ~
+    sudo apt-get update
+    sudo apt-get install qt5-default libqt5serialport5 libqt5serialport5-dev 
+    git clone https://github.com/wh201906/Proxmark3GUI.git --depth=1
+    cd Proxmark3GUI
+    mkdir build
+    cd build
+    qmake ../
+    make
+    make clean
+    cp -r ../lang ./
+    cp -r ../config ./
+    ./Proxmark3GUI
+
+***
+## Tutorial
+
+[1.Quickstart](doc/tutorial/Quickstart/quickstart.md)  
+[2.Edit Mifare Classic data](doc/tutorial/Edit_Mifare_Classic_data/Edit_Mifare_Classic_data.md)(Proxmark3 hardware is not necessary)  
+***
+
 ## Update Log:
 
+### V0.2.3
++ Fix bug [#27](https://github.com/wh201906/Proxmark3GUI/issues/27)
++ Try to support Non-ASCII path
+
+### V0.2.2
++ Load command format from external json file  
++ Fix bug [#20](https://github.com/wh201906/Proxmark3GUI/issues/20), [#21](https://github.com/wh201906/Proxmark3GUI/issues/21), [#22](https://github.com/wh201906/Proxmark3GUI/issues/22)  
++ Support Iceman/RRG repo v4.13441
+
+### V0.2.1
++ Optimize MIFARE Classic reading logic  
++ Fix bug [#16](https://github.com/wh201906/Proxmark3GUI/issues/16)  
++ Fix bug [#15](https://github.com/wh201906/Proxmark3GUI/issues/15) partially (the path can contain spaces now)  
+
+### V0.2
++ Use Dock widget for more flexible layout  
++ Support basic LF commands  
++ Fix a bug in RawCommand tab  
+
+### V0.1.4
++ Optimize performance  
++ Optimize UI  
++ Search available ports automatically  
++ Add High-DPI support  
++ Support configuring environment variables by script  
+(Useful when the client requires specific environment variables)  
++ All functions are compatible with Iceman/RRG repo(tested on v4.9237)  
++ Support specifying client working directory
++ Fix some bugs
+
+### V0.1.3
++ Fix Trailer Decoder
++ Add feedback when writing selected blocks
+
 ### V0.1.2
 + Optimize read logic
 + Make UI Customizable
 + Save client path automatically
-+ Add Trailer Decoder
++ Add Trailer Decoder(Deprecated, plz use V0.1.3 or higher version)
 + Support read/write selected blocks
 + Support a few Iceman functions
 + Fix some bugs

README/doc/README_zh_CN.md

@@ -1,66 +0,0 @@
-# Proxmark3GUI
-一个自制的[Proxmark3](https://github.com/Proxmark/proxmark3) GUI
-
-[English](../../README.md)
-
-***
-
-## 功能
-
-+ 快速查找可用端口并连接
-+ 支持直接输入PM3命令(官方版/冰人版)
-+ 有针对于Mifare卡（IC卡）的图形界面
-    + 支持不同大小的卡片(MINI, 1K, 2K, 4K)
-    + 支持编辑Mifare扇区数据
-    + 支持读取全卡/选中扇区，读卡逻辑更加智能
-    + 支持写入全卡/选中扇区
-    + 可以打开二进制/文本格式的扇区数据文件
-    + 分析访问控制位（Access Bits）
-    + 支持UID卡操作（UID快速读写，UFUID锁卡）
-+ 自定义UI界面
-+ ...
-
-***
-
-## 预览图
-![preview](../img/preview_zh_CN.png)  
-
- [更多预览](../doc/previews.md)  
-
-***
-
- ## 关于冰人版
- 这个GUI一开始是针对官方版本做的，现在正在尽力让它兼容冰人版的功能  
- （没钱买RDV4也没钱买两台PM3，测一次冰人就要烧一次固件 qwq）
-
- [已支持功能](../doc/supported_Iceman.md)
-***
-
-## 关于预编译Windows客户端
-
-一个国外大佬 [Gator96100](https://github.com/Gator96100) 做了个 [ProxSpace](https://github.com/Gator96100/ProxSpace) 以便在Windows平台上编译PM3固件和客户端，他还把自己编译好的客户端放到了[论坛](http://www.proxmark.org/forum/viewtopic.php?id=3975)里面  
-文件都是放到Google Drive上面的，国内网络无法访问，所以我在release版本里面放了个带预编译客户端版本的GUI。这个GUI也可以搭配你自己的客户端使用  
-(本来打算在CSDN下载里面放几个最新版客户端的，结果不能把下载币改为0)  
-感谢大佬  
-
-***
-
-## 更新日志:
-
-### V0.1.2
-+ 优化读卡逻辑
-+ UI自定义
-+ 自动保存客户端路径
-+ 添加访问控制位解码器（也可用于自己构造访问控制位）
-+ 支持仅读写选中块
-+ 支持部分冰人功能
-+ 修复部分bug
-
-### V0.1.1
-+ 完成整个Mifare模块（支持模拟卡和嗅探功能）
-
-### V0.1
-+ 支持处理Mifare卡片及相关数据文件
-
-### V0.0.1
-+ 一个带串口选择框的实验版本

README/doc/previews.md

@@ -1,16 +0,0 @@
-## Previews
-
-Raw Command:  
-![raw_command](../img/raw_command.gif) 
-
-Mifare Nested Attack:  
-![nested_attack](../img/mf_nested_attack.gif)  
-
-Mifare Load File:  
-![mf_loadfile](../img/mf_loadfile.gif)  
-
-Mifare Edit File:  
-![mf_editfile](../img/mf_editfile.gif)  
-
-Mifare Trailer Decoder:  
-![mf_trailer](../img/mf_trailer.gif)

README/doc/supported_Iceman.md

@@ -1,9 +0,0 @@
-## About Iceman fork/repo
-
-The [Iceman fork/repo](https://github.com/RfidResearchGroup/proxmark3) has more powerful functions like offline sniff. These guys even developed a new hardware called Proxmark3 RDV4 with smart card support. But the official repo and the Iceman repo is not fully compatible. This GUI was designed for only official repo at first, but I'm trying to make it compatible with Iceman repo.
-Supported functions when using Iceman client:
-+ Command Line
-+ Mifare Card info
-+ Mifare Check default keys
-+ Mifare Nested Attack
-+ Mifare Read/Write

common/myeventfilter.cpp

@@ -0,0 +1,13 @@
+#include "myeventfilter.h"
+
+MyEventFilter::MyEventFilter(QEvent::Type filter)
+{
+    targetEventType = filter;
+}
+
+bool MyEventFilter::eventFilter(QObject *obj, QEvent *event)
+{
+    if(event->type() == targetEventType)
+        emit eventHappened(obj, *event);
+    return QObject::eventFilter(obj, event);
+}

common/myeventfilter.h

@@ -0,0 +1,22 @@
+#ifndef MYEVENTFILTER_H
+#define MYEVENTFILTER_H
+
+#include <QObject>
+#include <QKeyEvent>
+
+class MyEventFilter : public QObject
+{
+    Q_OBJECT
+
+public:
+    explicit MyEventFilter(QEvent::Type filter);
+protected:
+    bool eventFilter(QObject *obj, QEvent *event) override;
+
+signals:
+    void eventHappened(QObject* obj_addr, QEvent& event);
+private:
+    QEvent::Type targetEventType;
+};
+
+#endif // MYEVENTFILTER_H

common/pm3process.cpp

@@ -12,44 +12,62 @@ PM3Process::PM3Process(QThread* thread, QObject* parent): QProcess(parent)
     serialListener->setTimerType(Qt::VeryCoarseTimer);
     connect(serialListener, &QTimer::timeout, this, &PM3Process::onTimeout);
     connect(this, &PM3Process::readyRead, this, &PM3Process::onReadyRead);
+    portInfo = nullptr;
 }
 
-void PM3Process::connectPM3(const QString path, const QString port)
+void PM3Process::connectPM3(const QString& path, const QStringList args)
 {
     QString result;
-    Util::ClientType clientType = Util::CLIENTTYPE_OFFICIAL;
+    Util::ClientType clientType;
     setRequiringOutput(true);
 
+    // stash for reconnect
+    currPath = path;
+    currArgs = args;
+
     // using "-f" option to make the client output flushed after every print.
-    start(path, QStringList() << port << "-f", QProcess::Unbuffered | QProcess::ReadWrite);
+    start(path, args, QProcess::Unbuffered | QProcess::ReadWrite | QProcess::Text);
     if(waitForStarted(10000))
     {
-        waitForReadyRead(1000);
+        waitForReadyRead(10000);
         setRequiringOutput(false);
         result = *requiredOutput;
         if(result.indexOf("[=]") != -1)
         {
             clientType = Util::CLIENTTYPE_ICEMAN;
             setRequiringOutput(true);
-            write("hw version\r\n");
-            waitForReadyRead(1000);
-            result = *requiredOutput;
+            write("hw version\n");
+            for(int i = 0; i < 50; i++)
+            {
+                waitForReadyRead(200);
+                result += *requiredOutput;
+                if(result.indexOf("os: ") != -1)
+                    break;
+            }
             setRequiringOutput(false);
         }
+        else
+        {
+            clientType = Util::CLIENTTYPE_OFFICIAL;
+        }
         if(result.indexOf("os: ") != -1) // make sure the PM3 is connected
         {
             emit changeClientType(clientType);
             result = result.mid(result.indexOf("os: "));
-            result = result.left(result.indexOf("\r\n"));
-            result = result.mid(3, result.lastIndexOf(" ") - 3);
+            result = result.left(result.indexOf("\n"));
+            result = result.mid(4, result.indexOf(" ", 4) - 4);
             emit PM3StatedChanged(true, result);
-            setSerialListener(port, true);
         }
         else
             kill();
     }
 }
 
+void PM3Process::reconnectPM3()
+{
+    connectPM3(currPath, currArgs);
+}
+
 void PM3Process::setRequiringOutput(bool st)
 {
     isRequiringOutput = st;
@@ -66,6 +84,7 @@ void PM3Process::setSerialListener(const QString& name, bool state)
 {
     if(state)
     {
+        currPort = name;
         portInfo = new QSerialPortInfo(name);
         serialListener->start();
         qDebug() << serialListener->thread();
@@ -73,18 +92,29 @@ void PM3Process::setSerialListener(const QString& name, bool state)
     else
     {
         serialListener->stop();
+        if(portInfo != nullptr)
+        {
             delete portInfo;
+            portInfo = nullptr;
         }
     }
+}
+
+void PM3Process::setSerialListener(bool state)
+{
+    setSerialListener(currPort, state);
+}
 
 void PM3Process::onTimeout() //when the proxmark3 client is unexpectedly terminated or the PM3 hardware is removed, the isBusy() will return false(only tested on Windows);
 {
+//    isBusy() is a deprecated function because it will block the serial port when the port is not in use.
+//    However, the PM3 client is supposed to use the target serial port exclusively, so it should be fine
+//    isBusy() will always return false on Raspbian, in this case, check "Keep the client active" in the Settings panel.
+//
 //    qDebug()<<portInfo->isBusy();
     if(!portInfo->isBusy())
     {
-        kill();
-        emit PM3StatedChanged(false);
-        setSerialListener("", false);
+        killPM3();
     }
 }
 
@@ -93,7 +123,6 @@ void PM3Process::testThread()
     qDebug() << "PM3:" << QThread::currentThread();
 }
 
-
 qint64 PM3Process::write(QString data)
 {
     return QProcess::write(data.toLatin1());
@@ -111,3 +140,23 @@ void PM3Process::onReadyRead()
 
     }
 }
+
+void PM3Process::setProcEnv(const QStringList* env)
+{
+//    qDebug() << "passed Env List" << *env;
+    this->setEnvironment(*env);
+    //    qDebug() << "final Env List" << processEnvironment().toStringList();
+}
+
+void PM3Process::setWorkingDir(const QString& dir)
+{
+    // the working directory cannot be the default, or the client will failed to load the dll
+    this->setWorkingDirectory(dir);
+}
+
+void PM3Process::killPM3()
+{
+    kill();
+    emit PM3StatedChanged(false);
+    setSerialListener(false);
+}

common/pm3process.h

@@ -8,6 +8,8 @@
 #include <QTimer>
 #include <QtSerialPort/QSerialPortInfo>
 #include <QtSerialPort/QSerialPort>
+#include <QProcessEnvironment>
+#include <QDir>
 
 #include "util.h"
 
@@ -21,9 +23,14 @@ public:
     void testThread();
 
 public slots:
-    void connectPM3(const QString path, const QString port);
+    void connectPM3(const QString& path, const QStringList args);
     void setSerialListener(const QString& name, bool state);
+    void setSerialListener(bool state);
     qint64 write(QString data);
+    void reconnectPM3();
+    void setProcEnv(const QStringList* env);
+    void setWorkingDir(const QString& dir);
+    void killPM3();
 private slots:
     void onTimeout();
     void onReadyRead();
@@ -33,9 +40,13 @@ private:
     void setRequiringOutput(bool st);// It only works in this class now
     QTimer* serialListener;
     QSerialPortInfo* portInfo;
+    QString currPath;
+    QString currPort = "";
+    QStringList currArgs;
+
 signals:
-    void PM3StatedChanged(bool st, QString info = "");
-    void newOutput(QString output);
+    void PM3StatedChanged(bool st, const QString& info = "");
+    void newOutput(const QString& output);
     void changeClientType(Util::ClientType);
 };
 

common/util.cpp

@@ -1,15 +1,22 @@
 #include "util.h"
 
+Util::ClientType Util::clientType = CLIENTTYPE_OFFICIAL;
+
+int Util::rawTabIndex = 0;
+QDockWidget* Util::rawDockPtr = nullptr;
+Ui::MainWindow* Util::ui = nullptr;
+
+
 Util::Util(QObject *parent) : QObject(parent)
 {
     isRequiringOutput = false;
     requiredOutput = new QString();
     timeStamp = QTime::currentTime();
-    this->clientType = CLIENTTYPE_OFFICIAL;
     qRegisterMetaType<Util::ClientType>("Util::ClientType");
 }
 
-void Util::processOutput(QString output)
+
+void Util::processOutput(const QString& output)
 {
 //    qDebug() << "Util::processOutput:" << output;
     if(isRequiringOutput)
@@ -20,30 +27,58 @@ void Util::processOutput(QString output)
     emit refreshOutput(output);
 }
 
-void Util::execCMD(QString cmd)
+void Util::execCMD(const QString& cmd)
 {
-    qDebug() << cmd;
-    emit write(cmd + "\r\n");
+    qDebug() << "executing: " << cmd;
+    if(isRunning)
+        emit write(cmd + "\n");
 }
 
-QString Util::execCMDWithOutput(QString cmd, unsigned long waitTime)
+QString Util::execCMDWithOutput(const QString& cmd, ReturnTrigger trigger, bool rawOutput)
 {
+    // if the trigger is empty, this function will wait trigger.waitTime then return all outputs during the wait time.
+    // otherwise, this function will return empty string if no trigger is detected, or return outputs if any trigger is detected.
+    // the waitTime will be refreshed if the client have new outputs
+    bool isResultFound = false;
+    QRegularExpression re;
+    re.setPatternOptions(QRegularExpression::DotMatchesEverythingOption);
+
+    if(!isRunning)
+        return "";
     QTime currTime = QTime::currentTime();
-    QTime targetTime = QTime::currentTime().addMSecs(waitTime);
+    QTime targetTime = QTime::currentTime().addMSecs(trigger.waitTime);
     isRequiringOutput = true;
     requiredOutput->clear();
     execCMD(cmd);
     while(QTime::currentTime() < targetTime)
     {
+        if(!isRunning)
+            break;
         QApplication::processEvents();
-        if(timeStamp > currTime)
+//        qDebug() << "currOutput:" << *requiredOutput;
+        for(QString otpt : trigger.expectedOutputs)
+        {
+            re.setPattern(otpt);
+            isResultFound = re.match(*requiredOutput).hasMatch();
+            if(isResultFound)
+            {
+                qDebug() << "output Matched: " << *requiredOutput;
+                break;
+            }
+        }
+        if(isResultFound)
+        {
+            delay(200);
+            break;
+        }
+        if(timeStamp > currTime) //has new output
         {
             currTime = timeStamp;
-            targetTime = timeStamp.addMSecs(waitTime);
+            targetTime = timeStamp.addMSecs(trigger.waitTime);
         }
     }
     isRequiringOutput = false;
-    return *requiredOutput;
+    return (isResultFound || trigger.expectedOutputs.isEmpty() || rawOutput ? *requiredOutput : "");
 }
 
 void Util::delay(unsigned int msec)
@@ -52,12 +87,61 @@ void Util::delay(unsigned int msec)
     while(QTime::currentTime() < timer)
         QApplication::processEvents(QEventLoop::AllEvents, 100);
 }
+
 Util::ClientType Util::getClientType()
 {
-    return this->clientType;
+    return Util::clientType;
 }
 
 void Util::setClientType(Util::ClientType clientType)
 {
-    this->clientType = clientType;
+    Util::clientType = clientType;
+}
+
+void Util::setRunningState(bool st)
+{
+    this->isRunning = st;
+}
+
+bool Util::chooseLanguage(QSettings* guiSettings, QMainWindow* window)
+{
+    // make sure the GUISettings is not in any group
+    QSettings* langSettings = new QSettings("lang/languages.ini", QSettings::IniFormat);
+    QMap<QString, QString> langMap;
+    langSettings->setIniCodec("UTF-8");
+    langSettings->beginGroup("Languages");
+    QStringList langList = langSettings->allKeys();
+    for(int i = 0; i < langList.size(); i++)
+        langMap.insert(langSettings->value(langList[i]).toString(), langList[i]);
+    langSettings->endGroup();
+    delete langSettings;
+    bool isOk = false;
+    QString selectedText = QInputDialog::getItem(window, "", "Choose a language:", langMap.keys(), 0, false, &isOk);
+    if(isOk)
+    {
+        guiSettings->beginGroup("lang");
+        guiSettings->setValue("language", langMap[selectedText]);
+        guiSettings->endGroup();
+        guiSettings->sync();
+    }
+    return isOk;
+}
+
+void Util::gotoRawTab()
+{
+    Util::ui->funcTab->setCurrentIndex(Util::rawTabIndex);
+    Util::rawDockPtr->setVisible(true);
+    Util::rawDockPtr->raise();
+}
+
+void Util::setUI(Ui::MainWindow *ui)
+{
+    Util::ui = ui;
+}
+
+
+void Util::setRawTab(QDockWidget *dockPtr, int tabIndex)
+{
+    Util::rawDockPtr = dockPtr;
+    Util::rawTabIndex = tabIndex;
 }

common/util.h

@@ -9,6 +9,13 @@
 #include <QTime>
 #include <QTimer>
 #include <QMetaType>
+#include <QRegularExpression>
+#include <QSettings>
+#include <QMainWindow>
+#include <QInputDialog>
+#include <QDockWidget>
+
+#include "ui_mainwindow.h"
 
 class Util : public QObject
 {
@@ -20,26 +27,55 @@ public:
         CLIENTTYPE_ICEMAN,
     };
 
+    struct ReturnTrigger
+    {
+        unsigned long waitTime;
+        QStringList expectedOutputs;
+        ReturnTrigger(unsigned long time)
+        {
+            waitTime = time;
+            expectedOutputs = QStringList();
+        }
+        ReturnTrigger(const QStringList& outputs)
+        {
+            waitTime = 10000;
+            expectedOutputs = outputs;
+        }
+        ReturnTrigger(unsigned long time, const QStringList& outputs)
+        {
+            waitTime = time;
+            expectedOutputs = outputs;
+        }
+    };
+
     Q_ENUM(Util::ClientType)
 
     explicit Util(QObject *parent = nullptr);
 
-    void execCMD(QString cmd);
-    QString execCMDWithOutput(QString cmd, unsigned long waitTime = 2000);
+    void execCMD(const QString& cmd);
+    QString execCMDWithOutput(const QString& cmd, ReturnTrigger trigger = 10000, bool rawOutput = false);
     void delay(unsigned int msec);
-    ClientType getClientType();
+    static ClientType getClientType();
+    static int rawTabIndex;
+    static QDockWidget* rawDockPtr;
+    static bool chooseLanguage(QSettings *guiSettings, QMainWindow *window);
 public slots:
-    void processOutput(QString output);
-    void setClientType(Util::ClientType clientType);
-
+    void processOutput(const QString& output);
+    static void setClientType(Util::ClientType clientType);
+    void setRunningState(bool st);
+    static void gotoRawTab();
+    static void setUI(Ui::MainWindow *ui);
+    static void setRawTab(QDockWidget* dockPtr, int tabIndex);
 private:
     bool isRequiringOutput;
+    bool isRunning;
     QString* requiredOutput;
     QTime timeStamp;
-    ClientType clientType;
+    static ClientType clientType;
+    static Ui::MainWindow *ui;
 signals:
     void refreshOutput(const QString& output);
-    void write(QString data);
+    void write(QString data); // connected to PM3Process::write(QString data);
 };
 
 #endif // UTIL_H

config/config_official.json

@@ -0,0 +1,195 @@
+{
+    "//": "Based on Proxmark3 official repo v3.1.0, commit 6116334",
+    "//": "You can change this file if the command format of client changes",
+    "mifare classic": {
+        "nested": {
+            "cmd": "hf mf nested <card type> *",
+            "card type": {
+                "mini": "0",
+                "1k": "1",
+                "2k": "2",
+                "4k": "4"
+            },
+            "key pattern": "\\|\\s*\\d{3}\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|",
+            "key A index": 2,
+            "key B index": 4
+        },
+        "check": {
+            "cmd": "hf mf chk *<card type> ?",
+            "card type": {
+                "mini": "0",
+                "1k": "1",
+                "2k": "2",
+                "4k": "4"
+            },
+            "key pattern": "\\|\\s*\\d{3}\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|",
+            "key A index": 2,
+            "key B index": 3
+        },
+        "info": {
+            "cmd": "hf 14a info"
+        },
+        "sniff": {
+            "cmd": "hf mf sniff"
+        },
+        "sniff 14a": {
+            "cmd": "hf 14a snoop"
+        },
+        "list": {
+            "cmd": "hf list mf"
+        },
+        "dump": {
+            "cmd": "hf mf dump"
+        },
+        "restore": {
+            "cmd": "hf mf restore"
+        },
+        "emulator wipe": {
+            "cmd": "hf mf eclr"
+        },
+        "Magic Card wipe": {
+            "cmd": "hf mf cwipe <card type> f",
+            "card type": {
+                "mini": "0",
+                "1k": "1",
+                "2k": "2",
+                "4k": "4"
+            }
+        },
+        "emulator read block": {
+            "cmd": "hf mf eget <block>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "Magic Card read block": {
+            "cmd": "hf mf cgetblk <block>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "normal read block": {
+            "cmd": "hf mf rdbl <block> <key type> <key>",
+            "key type": {
+                "A": "A",
+                "B": "B"
+            },
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "darkside": {
+            "cmd": "hf mf mifare"
+        },
+        "save sniff": {
+            "cmd": "hf list mf -s <filename>"
+        },
+        "load sniff": {
+            "cmd": "hf list mf -l <filename>"
+        },
+        "hardnested": {
+            "cmd": "hf mf hardnested <known key block> <known key type> <known key> <target key block> <target key type>",
+            "known key type": {
+                "A": "A",
+                "B": "B"
+            },
+            "target key type": {
+                "A": "A",
+                "B": "B"
+            }
+        },
+        "normal read sector": {
+            "cmd": "hf mf rdsc <sector> <key type> <key>",
+            "key type": {
+                "A": "A",
+                "B": "B"
+            },
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "Magic Card read sector": {
+            "cmd": "hf mf cgetsc <sector>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "//": "When writing a block, if the result is not empty and doesn't contain the failed flag, the function will return true",
+        "normal write block": {
+            "cmd": "hf mf wrbl <block> <key type> <key> <data>",
+            "key type": {
+                "A": "A",
+                "B": "B"
+            },
+            "failed flag": [
+                "isOk:00"
+            ]
+        },
+        "Magic Card write block": {
+            "cmd": "hf mf csetblk <block> <data>",
+            "failed flag": [
+                "No chinese magic"
+            ]
+        },
+        "emulator write block": {
+            "cmd": "hf mf eset <block> <data>"
+        },
+        "Magic Card lock": {
+            "cmd": "hf 14a raw ",
+            "sequence": [
+                "-pa -b7 40",
+                "-pa 43",
+                "-pa E0 00 39 F7",
+                "-pa E1 00 E1 EE",
+                "-pa 85 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 18 47",
+                "-a 52"
+            ]
+        },
+        "Magic Card set parameter": {
+            "cmd": "hf mf csetuid <uid> <atqa> <sak>"
+        }
+    },
+    "lf": {
+        "read": {
+            "cmd": "lf read",
+            "show cmd": "data plot"
+        },
+        "sniff": {
+            "cmd": "lf snoop",
+            "show cmd": "data plot"
+        },
+        "search": {
+            "cmd": "lf search u"
+        },
+        "tune": {
+            "cmd": "hw tune l"
+        },
+        "get config": {
+            "cmd": "hw status",
+            "field start": "LF Sampling config:",
+            "field end": "USB Speed:",
+            "divisor": {
+                "flag": "divisor:",
+                "pattern": "\\d+"
+            },
+            "bits per sample": {
+                "flag": "bps:",
+                "pattern": "\\d+"
+            },
+            "decimation": {
+                "flag": "decimation:",
+                "pattern": "\\d+"
+            },
+            "averaging": {
+                "flag": "averaging:",
+                "pattern": "\\d+"
+            },
+            "trigger threshold": {
+                "flag": "trigger threshold:",
+                "pattern": "\\d+"
+            },
+            "samples to skip": {
+                "flag": "samples to skip:",
+                "pattern": "\\d+"
+            },
+            "//": "execute 'cmd' then find parameters between 'field stard' and 'field end'",
+            "//": "for each line, if the line doesn't have any flag, skip",
+            "//": "otherwise, delete characters before 'flag' and 'flag' itself, then use 'pattern' to get the parameter",
+            "//": "If 'replace' dict exists, replace all keys with respective values before getting parameters"
+        },
+        "set config": {
+            "cmd": "lf config q <divisor> b <bits per sample> d <decimation> a <averaging> t <trigger threshold> s <samples to skip>",
+            "divisor cmd": "hw setlfdivisor <divisor>"
+        }
+    }
+}

config/config_rrgv4.13.json

@@ -0,0 +1,203 @@
+{
+    "//": "Based on Proxmark3 rrg repo v4.13441, commit 35ddebc",
+    "//": "You can change this file if the command format of client changes",
+    "mifare classic": {
+        "nested": {
+            "cmd": "hf mf nested --<card type> --blk <block> -<key type> -k <key>",
+            "static cmd": "hf mf staticnested --<card type> --blk <block> -<key type> -k <key>",
+            "card type": {
+                "mini": "mini",
+                "1k": "1k",
+                "2k": "2k",
+                "4k": "4k"
+            },
+            "key type": {
+                "A": "a",
+                "B": "b"
+            },
+            "key pattern": "\\|\\s*\\d{3}\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|",
+            "key A index": 2,
+            "key B index": 4
+        },
+        "check": {
+            "cmd": "hf mf chk --<card type>",
+            "card type": {
+                "mini": "mini",
+                "1k": "1k",
+                "2k": "2k",
+                "4k": "4k"
+            },
+            "key pattern": "\\|\\s*\\d{3}\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|\\s*.+?\\s*\\|",
+            "key A index": 2,
+            "key B index": 4
+        },
+        "info": {
+            "cmd": "hf 14a info"
+        },
+        "sniff": {
+            "cmd": "hf sniff"
+        },
+        "sniff 14a": {
+            "cmd": "hf 14a sniff"
+        },
+        "list": {
+            "cmd": "trace list -t mf"
+        },
+        "dump": {
+            "cmd": "hf mf dump"
+        },
+        "restore": {
+            "cmd": "hf mf restore"
+        },
+        "emulator wipe": {
+            "cmd": "hf mf eclr"
+        },
+        "Magic Card wipe": {
+            "cmd": "hf mf cwipe"
+        },
+        "emulator read block": {
+            "cmd": "hf mf egetblk --blk <block>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "Magic Card read block": {
+            "cmd": "hf mf cgetblk --blk <block>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "normal read block": {
+            "cmd": "hf mf rdbl --blk <block> -<key type> -k <key>",
+            "key type": {
+                "A": "a",
+                "B": "b"
+            },
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "darkside": {
+            "cmd": "hf mf darkside"
+        },
+        "save sniff": {
+            "cmd": "trace save -f <filename>"
+        },
+        "load sniff": {
+            "cmd": "trace load -f <filename>",
+            "show cmd": "trace list --buffer -t mf"
+        },
+        "hardnested": {
+            "cmd": "hf mf hardnested --blk <known key block> -<known key type> -k <known key> --tblk <target key block> --t<target key type>",
+            "known key type": {
+                "A": "a",
+                "B": "b"
+            },
+            "target key type": {
+                "A": "a",
+                "B": "b"
+            }
+        },
+        "normal read sector": {
+            "cmd": "hf mf rdsc --sec <sector> -<key type> -k <key>",
+            "key type": {
+                "A": "a",
+                "B": "b"
+            },
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "Magic Card read sector": {
+            "cmd": "hf mf cgetsc --sec <sector>",
+            "data pattern": "([0-9a-fA-F]{2} ){15}[0-9a-fA-F]{2}"
+        },
+        "//": "When writing a block, if the result is not empty and doesn't contain the failed flag, the function will return true",
+        "normal write block": {
+            "cmd": "hf mf wrbl --blk <block> -<key type> -k <key> -d <data>",
+            "key type": {
+                "A": "a",
+                "B": "b"
+            },
+            "failed flag": [
+                "fail",
+                "error"
+            ]
+        },
+        "Magic Card write block": {
+            "cmd": "hf mf csetblk --blk <block> -d <data>",
+            "failed flag": [
+                "fail",
+                "error"
+            ]
+        },
+        "emulator write block": {
+            "cmd": "hf mf esetblk --blk <block> -d <data>"
+        },
+        "Magic Card lock": {
+            "cmd": "hf 14a raw ",
+            "sequence": [
+                "-ak -b 7 40",
+                "-ak 43",
+                "-ak E0 00 39 F7",
+                "-ak E1 00 E1 EE",
+                "-ak 85 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 18 47",
+                "-a 52"
+            ]
+        },
+        "Magic Card set parameter": {
+            "cmd": "hf mf csetuid --uid <uid> --atqa <atqa> --sak <sak>"
+        }
+    },
+    "lf": {
+        "read": {
+            "cmd": "lf read -v",
+            "show cmd": "data plot"
+        },
+        "sniff": {
+            "cmd": "lf sniff -v",
+            "show cmd": "data plot"
+        },
+        "search": {
+            "cmd": "lf search -u"
+        },
+        "tune": {
+            "cmd": "lf tune --divisor <divisor>"
+        },
+        "get config": {
+            "cmd": "hw status",
+            "field start": "LF Sampling config",
+            "field end": "LF Sampling Stack",
+            "divisor": {
+                "flag": "divisor",
+                "pattern": "\\d+"
+            },
+            "bits per sample": {
+                "flag": "bits per sample",
+                "pattern": "\\d+"
+            },
+            "decimation": {
+                "flag": "decimation",
+                "pattern": "\\d+"
+            },
+            "averaging": {
+                "flag": "averaging",
+                "pattern": "\\d+",
+                "replace": {
+                    "yes": "1",
+                    "no": "0",
+                    "Yes": "1",
+                    "No": "0"
+                }
+            },
+            "trigger threshold": {
+                "flag": "trigger threshold",
+                "pattern": "\\d+"
+            },
+            "samples to skip": {
+                "flag": "samples to skip",
+                "pattern": "\\d+"
+            },
+            "//": "execute 'cmd' then find parameters between 'field stard' and 'field end'",
+            "//": "for each line, if the line doesn't have any flag, skip",
+            "//": "otherwise, delete characters before 'flag' and 'flag' itself, then use 'pattern' to get the parameter",
+            "//": "If 'replace' dict exists, replace all keys with respective values before getting parameters"
+        },
+        "set config": {
+            "cmd": "lf config --divisor <divisor> --bps <bits per sample> --dec <decimation> --avg <averaging> --trig <trigger threshold> --skip <samples to skip>",
+            "divisor cmd": "hw setlfdivisor -d <divisor>"
+        }
+    }
+}

doc/README/README_zh_CN.md

@@ -0,0 +1,123 @@
+# Proxmark3GUI
+![downloads](https://img.shields.io/github/downloads/wh201906/Proxmark3GUI/total)  
+
+一个自制的[Proxmark3](https://github.com/Proxmark/proxmark3) GUI，可在Windows/Linux系统下运行
+
+[English](../../README.md)
+
+***
+
+## 功能
+
++ 快速查找可用端口并连接
++ 支持直接输入PM3命令(官方版/冰人版)
++ 有针对于Mifare卡（IC卡）的图形界面
+    + 支持不同大小的卡片(MINI, 1K, 2K, 4K)
+    + 支持编辑Mifare扇区数据
+    + 支持读取全卡/选中扇区，读卡逻辑更加智能
+    + 支持写入全卡/选中扇区
+    + 可以打开二进制/文本格式的扇区数据文件
+    + 分析访问控制位（Access Bits）
+    + 支持UID卡操作（UID快速读写，UFUID锁卡）
++ 支持部分低频命令
++ 自定义UI界面，各选项卡可拆分组合
++ ...
+
+***
+
+## 预览图
+![preview](preview_zh_CN.png)  
+
+ [更多预览](../preview/previews.md)  
+
+***
+
+ ## 关于冰人版
+ [冰人版](https://github.com/RfidResearchGroup/proxmark3)(Iceman/RRG)的客户端和固件更新更为激进，相比官方版具有更多的功能  
+ 此GUI所有功能均兼容冰人版（在v4.13441上测试通过）  
+
+***
+
+## 关于预编译Windows客户端
+
+一位国外大佬 [Gator96100](https://github.com/Gator96100) 做了个 [ProxSpace](https://github.com/Gator96100/ProxSpace) 以便在Windows平台上编译PM3固件和客户端，他还把自己编译好的客户端放到了[网站](https://www.proxmarkbuilds.org/)上  
+release页面中有含客户端的GUI。这个GUI也可以搭配你自己的客户端使用  
+(本来打算在CSDN下载里面放几个最新版客户端的，结果不能把下载币改为0)  
+感谢大佬  
+
+***
+
+## 在Linux系统下编译
+
+    cd ~
+    sudo apt-get update
+    sudo apt-get install qt5-default libqt5serialport5 libqt5serialport5-dev 
+    git clone https://github.com/wh201906/Proxmark3GUI.git --depth=1
+    cd Proxmark3GUI
+    mkdir build
+    cd build
+    qmake ../
+    make
+    make clean
+    cp -r ../lang ./
+    cp -r ../config ./
+    ./Proxmark3GUI
+
+***
+## 教程
+[1.快速上手](../tutorial/Quickstart/quickstart_zh_CN.md)  
+[2.编辑Mifare(IC)卡数据](../tutorial/Edit_Mifare_Classic_data/Edit_Mifare_Classic_data_zh_CN.md)（无需PM3硬件）  
+***
+## 更新日志:
+
+### V0.2.3
++ 修复 [#27](https://github.com/wh201906/Proxmark3GUI/issues/27)
++ 尝试支持中文启动路径
+
+### V0.2.2
++ 从外部文件加载客户端命令格式  
++ 修复 [#20](https://github.com/wh201906/Proxmark3GUI/issues/20), [#21](https://github.com/wh201906/Proxmark3GUI/issues/21), [#22](https://github.com/wh201906/Proxmark3GUI/issues/22)  
++ 兼容冰人版客户端 v4.13441
+
+### V0.2.1
++ 优化MIFARE Classic读卡逻辑
++ 修复 [#16](https://github.com/wh201906/Proxmark3GUI/issues/16) （配合新版RRG固件时无法读取扇区数据）
++ 修复 [#15](https://github.com/wh201906/Proxmark3GUI/issues/15) （路径中支持空格）
+
+### V0.2
++ 使用浮动窗口，界面配置更加灵活  
++ 支持部分低频命令  
++ 修复原始命令选项卡中的一个Bug  
+
+### V0.1.4
++ 优化性能  
++ 优化用户界面  
++ 自动搜索可用端口  
++ 支持高分屏  
++ 可通过外部脚本配置环境变量  
+(在客户端需要配置环境变量时很有用)  
++ 全功能兼容冰人版（在v4.9237上测试通过）  
++ 支持指定客户端工作路径
++ 修复部分bug
+
+### V0.1.3
++ 修复访问控制位解码器
++ 写多个块时显示写入结果
+
+### V0.1.2
++ 优化读卡逻辑
++ UI自定义
++ 自动保存客户端路径
++ 添加访问控制位解码器（也可用于自己构造访问控制位）（有bug，请使用V0.1.3或更高版本）
++ 支持仅读写选中块
++ 支持部分冰人功能
++ 修复部分bug
+
+### V0.1.1
++ 完成整个Mifare模块（支持模拟卡和嗅探功能）
+
+### V0.1
++ 支持处理Mifare卡片及相关数据文件
+
+### V0.0.1
++ 一个带串口选择框的实验版本

doc/preview/previews.md

@@ -0,0 +1,20 @@
+## Previews
+
+Raw Command:  
+![raw_command](raw_command.gif) 
+
+Mifare Nested Attack:  
+![nested_attack](mf_nested_attack.gif)  
+
+Mifare Load File:  
+![mf_loadfile](mf_loadfile.gif)  
+
+Mifare Edit File:  
+![mf_editfile](mf_editfile.gif)  
+
+Mifare Trailer Decoder:  
+![mf_trailer](mf_trailer.gif)
+
+Dock Widget:  
+![dock1](dock1.png)  
+![dock2](dock2.png)  

doc/tutorial/Edit_Mifare_Classic_data/Edit_Mifare_Classic_data.md

@@ -0,0 +1,50 @@
+# Edit Mifare Classic data
+
+[中文教程](Edit_Mifare_Classic_data_zh_CN.md)  
+This function is useful even if you don't use Proxmark3.  
+
+## About card type
+There are four sizes of Mifare Classic card  
++ 320Byte, also known as MINI, S20  
++ 1kB, also known as S50  
++ 2kB  
++ 4kB, alsow known as S70  
+
+Before any operation, you need to choose the right card type.   
+If you don't know your card type, you can try 1K first. Mifare Classic S50(1K) is the most common type.  
+![](cardtype.png)  
+
+## About file format
+This program supports binary data file and text data file.  
+Binary data files have the same size of chosen card type.(e.g, type 1K->1024KB data file).  
+The file extensions of them are always .dump or .bin.  
+You can edit them by hex editor or this program.  
+![](binary_file.png)  
+Text data files can be open by any text editors.  
+The file extensions of them are always .eml or .txt.  
+![](text_file.png)  
+
+## Load
+Go to "Mifare"->"File"->, choose "data" on the left and click "Load", then choose the file you want to load. The program will detect the file type by context.  
+![](load.png)  
+![](after_load.png)  
+Also, you can drag the file into data widget to load the data file.  
+![](drag.png)  
+
+## Edit
+Double click any data row to start edit  
+![](edit.png)  
+You don't need to fill the space between every byte.  
+![](edit_nospace.png)  
+
+## Save
+Go to "Mifare"->"File"->, choose "data" on the left and click "Save", then choose the path you want to save and the file format.  
+![](save.png)  
+
+## File format convert
+If you got a binary data file and you want to edit with notepad, here are the steps.
++ Load the orignal binary file
++ Save it as a text file
++ Edit the new file with whatever you want then save it
++ Load the edited file
++ Save it as binary file  

doc/tutorial/Edit_Mifare_Classic_data/Edit_Mifare_Classic_data_zh_CN.md

@@ -0,0 +1,51 @@
+# 编辑Mifare(IC)卡数据
+
+[English](Edit_Mifare_Classic_data.md)  
+此功能对没有PM3硬件的用户也很有用。  
+
+## 关于卡类型
+Mifare Classic卡有四种不同的容量  
++ 320字节，也被称作MINI卡，S20卡  
++ 1k字节，也被称为S50卡，最常见的型号  
++ 2k字节  
++ 4k字节，也被称为S70卡  
+
+在操作前，请先选择卡类型。  
+如果自己不清楚卡类型，可尝试选择1k卡，这是最常见的型号。  
+![](cardtype_zh_CN.png)  
+
+## 关于文件格式
+此程序支持二进制文件格式和文本文件格式。  
+二进制文件的大小和所选卡类型的大小完全相等，文件中的每一个字节对应卡片数据中的一个字节。  
+二进制文件的后缀名一般是.dump或.bin。
+此类文件需要使用16进制编辑器或者此程序来编辑。  
+![](binary_file.png)  
+文本文件可被任意文本编辑器打开。  
+此类文件的后缀名一般是.eml或.txt。  
+![](text_file.png)  
+
+## 加载文件
+在“Mifare”选项卡->“文件”框中勾选“数据”，点击“加载”按钮载入文件。  
+此程序会根据文件内容判断待加载的文件格式。  
+![](load.png)  
+![](after_load_zh_CN.png)  
+程序还支持拖拽加载。你可以直接把文件拖入左边数据显示器中。  
+![](drag_zh_CN.png)  
+
+## 编辑数据
+双击数据行即可开始编辑。  
+![](edit_zh_CN.png)  
+编辑过程中无需手动补全字节间空格。  
+![](edit_nospace_zh_CN.png)  
+
+## 保存文件
+在“Mifare”选项卡->“文件”框中勾选“数据”，点击“保存”按钮，选择保存的路径和文件格式即可保存文件。  
+![](save.png)  
+
+## 文件格式转换
+如果你想用其它文本编辑器编辑二进制文件，可以参考以下步骤
++ 加载原始二进制文件  
++ 保存为文本文件  
++ 用自己喜欢的文本编辑器编辑后保存  
++ 加载编辑后的文件  
++ 保存为二进制文件  

doc/tutorial/Quickstart/quickstart.md

@@ -0,0 +1,45 @@
+# Quickstart
+
+[中文教程](quickstart_zh_CN.md)  
+***
+**On Windows**
+***
+## Use GUI with included client
+(1) Download the GUI with included client on [release](https://github.com/wh201906/Proxmark3GUI/releases) page  
+![](download_withclient.png)  
+
+(2) Extract the .7z file to a path. The target path should not contain non-ASCII characters  
+![](pm3guipath.png)  
+
+(3) Open Proxmark3GUI.exe in the GUI folder, then select the language and click "OK". Now you can use it  
+![](pm3gui.png)  
+![](language.png)  
+
+## Use the GUI with your own client
+(1) Download the standalone GUI on [release](https://github.com/wh201906/Proxmark3GUI/releases) page  
+![](download.png)  
+
+(2) Extract the .7z file to a path. The target path should not contain non-ASCII characters. Make sure the client path and the GUI path are different.  
+
+(3) Open the GUI. Input the client path in the "Client Path" editbox on the top of the main window.  
+![](pm3path.png)  
+
+(4) Go to "Settings" panel. Input the config file path which matching the client you use.  
+![](configpath.png)  
+
+(5) If setup.bat is required, input the script path in the "Preload script path" editbox.
+![](preloadpath.png)  
+
+(6) If using RRG/Iceman repo, input "-p \<port\> -f" in the "Start arguments" editbox.
+![](args.png)  
+
+***
+**On Linux**
+***
+(1) Build the GUI by following the instructions on [README](../../../README.md)  
+(2) Config the GUI with the same steps of "On Windows"->"Use the GUI with your own client"  
+(3) You might need to change "\<port\>" to "/dev/\<port\>" in "Settings"->"Start arguments" editbox  
+![](args_linux.png)  
+
+(4) If you are using Raspbian(Raspberry OS), you might need to check "Keep the client active even the PM3 hardware is disconnected." in the "Steeings" panel  
+![](keep.png)  

doc/tutorial/Quickstart/quickstart_zh_CN.md

@@ -0,0 +1,49 @@
+# 快速上手
+
+[English](quickstart.md)  
+***
+**Windows用户**
+***
+## 使用包含客户端的版本
+(1) 直接下载[release](https://github.com/wh201906/Proxmark3GUI/releases)当中包含客户端的版本即可  
+![](download_withclient.png)  
+（例如Vx.x.x-win-Officialclient.7z或Vx.x.x-win-RRGclient.7z，前者为官方客户端，后者为冰人版/RRG客户端）  
+
+(2) 下载完成后将压缩包内所有内容解压到不含中文的路径当中  
+![](pm3guipath.png)  
+
+(3) 双击GUI目录下的Proxmark3GUI.exe，选择语言，点击OK，即可正常运行  
+![](pm3gui.png)  
+![](language_zh_CN.png)  
+***
+
+## 使用现有客户端
+(1) 下载[release](https://github.com/wh201906/Proxmark3GUI/releases)当中不包含客户端的版本  
+![](download.png)  
+
+(2) 解压到不含中文的路径当中  
+（注意，GUI所在目录和PM3客户端所在目录不能相同）  
+
+(3) 双击打开，选择语言，在顶端“客户端路径”当中填入proxmark3.exe的路径  
+![](pm3path_zh_CN.png)  
+
+(4) 进入“设置”面板，根据自己使用的客户端类型（官方版/冰人版）选择正确的配置文件  
+（./config/config_official.json或./config/config_rrgv4.13.json）  
+![](configpath_zh_CN.png)  
+
+(5) 若客户端启动时需要双击setup.bat启动，而setup.bat内会设置客户端运行时的环境变量，则需要在“预加载脚本路径”当中填入setup.bat的路径  
+![](preloadpath_zh_CN.png)  
+
+(6) 若使用的是冰人固件，则可能需要在“启动参数”当中填入“-p \<port\> -f”  
+![](args_zh_CN.png)  
+
+***
+**Linux用户**
+***
+(1) 参考[README](../../README/README_zh_CN.md)当中的编译步骤手动编译Proxmark3GUI  
+(2) 参考“Windows用户”->“使用现有客户端”的(2)~(6)步进行配置  
+(3) “设置”->“启动参数”当中可能需要将“\<port\>”改为“/dev/\<port\>”  
+![](args_linux_zh_CN.png)  
+
+(4) 若使用树莓派Raspbian系统且连接成功若干秒后PM3会自动断开，则需要在“设置”面板中勾选“在PM3断开后保持客户端运行”  
+![](keep_zh_CN.png)  

lang/languages.ini

@@ -0,0 +1,3 @@
+[Languages]
+en_US=English
+zh_CN=简体中文

main.cpp

@@ -4,56 +4,60 @@
 #include <QSettings>
 #include <QTranslator>
 #include <QMessageBox>
-#include <QInputDialog>
+#include <QTextCodec>
+#include <QDir>
 
 int main(int argc, char *argv[])
 {
+    // A trick to handle non-ascii path
+    // The application cannot find the plugins when the path contains non ascii characters.
+    // However, the plugins will be load after creating MainWindow(or QApplication?).
+    // QDir will handle the path correctly.
+    QDir* pluginDir = new QDir;
+    if(pluginDir->cd("plugins")) // has plugins folder
+    {
+        qputenv("QT_PLUGIN_PATH", pluginDir->absolutePath().toLocal8Bit());
+    }
+    delete pluginDir;
+
+    QCoreApplication::setAttribute(Qt::AA_EnableHighDpiScaling);
+    QTextCodec::setCodecForLocale(QTextCodec::codecForName("UTF-8"));
+    QDir *langPath = new QDir();
     QApplication a(argc, argv);
     MainWindow w;
+
     QSettings* settings = new QSettings("GUIsettings.ini", QSettings::IniFormat);
+    settings->setIniCodec("UTF-8");
     settings->beginGroup("lang");
-    QVariant lang = settings->value("language", "null");
-    if(lang == "null")
+    QString currLang = settings->value("language", "").toString();
+    settings->endGroup();
+    if(currLang == "")
     {
-#ifdef Q_OS_WIN
-        lang = "lang/en_US.qm";
-#else
-        lang = "lang/en_US.ts";
-#endif
-        QStringList langList;
-        langList.append("English");
-        langList.append("简体中文");
-        QString seletedText = QInputDialog::getItem(&w, "", "Choose a language:", langList, 0, false);
-        if(seletedText == "English")
+        if(Util::chooseLanguage(settings, &w))
         {
-#ifdef Q_OS_WIN
-            lang = "lang/en_US.qm";
-#else
-            lang = "lang/en_US.ts";
-#endif
-        }
-        else if(seletedText == "简体中文")
-        {
-#ifdef Q_OS_WIN
-            lang = "lang/zh_CN.qm";
-#else
-            lang = "lang/zh_CN.ts";
-#endif
+            settings->beginGroup("lang");
+            currLang = settings->value("language", "").toString();
+            settings->endGroup();
         }
+        else
+            currLang = "en_US";
     }
+    currLang += ".qm";
+    langPath->cd("lang");
     QTranslator* translator = new QTranslator(&w);
-    if(translator->load(lang.toString()))
+    if(translator->load(currLang, langPath->absolutePath()))
     {
         a.installTranslator(translator);
-        settings->setValue("language", lang);
     }
     else
     {
-        QMessageBox::information(&w, "Error", "Can't load " + lang.toString() + " as translation file.");
+        QMessageBox::information(&w, "Error", "Can't load " + currLang + " as translation file.");
     }
-    settings->endGroup();
     delete settings;
+    delete langPath;
     w.initUI();
     w.show();
     return a.exec();
 }
+
+

module/lf.cpp

@@ -0,0 +1,158 @@
+#include "lf.h"
+#include <QJsonArray>
+
+const LF::LFConfig LF::defaultLFConfig;
+
+LF::LF(Ui::MainWindow *ui, Util *addr, QWidget *parent): QObject(parent)
+{
+    this->parent = parent;
+    util = addr;
+    this->ui = ui;
+
+    LFconfigPattern = new QRegularExpression("(\\d+)|Yes|No");
+    currLFConfig = defaultLFConfig;
+}
+
+void LF::read()
+{
+    QVariantMap config = configMap["read"].toMap();
+    util->execCMD(config["cmd"].toString());
+    Util::gotoRawTab();
+    util->execCMD(config["show cmd"].toString());
+}
+
+void LF::sniff()
+{
+    QVariantMap config = configMap["sniff"].toMap();
+    util->execCMD(config["cmd"].toString());
+    Util::gotoRawTab();
+    util->execCMD(config["show cmd"].toString());
+}
+
+void LF::search()
+{
+    QVariantMap config = configMap["search"].toMap();
+    util->execCMD(config["cmd"].toString());
+    Util::gotoRawTab();
+}
+
+void LF::tune()
+{
+    QVariantMap config = configMap["tune"].toMap();
+    QString cmd = config["cmd"].toString();
+    cmd.replace("<divisor>", QString::number(currLFConfig.divisor));
+    util->execCMD(cmd);
+    Util::gotoRawTab();
+}
+
+bool LF::getLFConfig_helper(const QVariantMap& map, QString& str, int* result)
+{
+    int len;
+    QString flag = map["flag"].toString();
+    QRegularExpressionMatch reMatch;
+    if(!str.contains(flag))
+        return false;
+    len = str.length() - (str.indexOf(flag) + flag.length());
+    str = str.right(len);
+    if(map.contains("replace"))
+    {
+        QVariantMap table = map["replace"].toMap();
+        for(auto it = table.begin(); it != table.end(); it++)
+        {
+            str.replace(it.key(), it.value().toString());
+        }
+    }
+    reMatch = QRegularExpression(map["pattern"].toString()).match(str);
+    if(!reMatch.hasMatch())
+        return false;
+    *result = reMatch.captured().toInt();
+    qDebug() << *result;
+    return true;
+
+}
+
+void LF::getLFConfig()
+{
+
+    QRegularExpressionMatch reMatch;
+    QString result;
+    QStringList resultList;
+    int start, end, temp;
+    QVariantMap config = configMap["get config"].toMap();
+    QString cmd = config["cmd"].toString();
+    result = util->execCMDWithOutput(cmd, 400);
+    start = result.indexOf(config["field start"].toString());
+    end = result.indexOf(config["field end"].toString());
+    result = result.mid(start, end - start);
+#if (QT_VERSION <= QT_VERSION_CHECK(5,14,0))
+    resultList = result.split("\n", QString::SkipEmptyParts);
+#else
+    resultList = result.split("\n", Qt::SkipEmptyParts);
+#endif
+    qDebug() << "LF CONFIG GET\n" << resultList;
+    for(auto it = resultList.begin(); it != resultList.end(); it++)
+    {
+        if(getLFConfig_helper(config["divisor"].toMap(), *it, &temp))
+            currLFConfig.divisor = temp;
+        else if(getLFConfig_helper(config["bits per sample"].toMap(), *it, &temp))
+            currLFConfig.bitsPerSample = temp;
+        else if(getLFConfig_helper(config["decimation"].toMap(), *it, &temp))
+            currLFConfig.decimation = temp;
+        else if(getLFConfig_helper(config["averaging"].toMap(), *it, &temp))
+            currLFConfig.averaging = (bool)temp;
+        else if(getLFConfig_helper(config["trigger threshold"].toMap(), *it, &temp))
+            currLFConfig.triggerThreshold = temp;
+        else if(getLFConfig_helper(config["samples to skip"].toMap(), *it, &temp))
+            currLFConfig.samplesToSkip = temp;
+    }
+    syncWithUI();
+}
+
+void LF::setLFConfig(LF::LFConfig lfconfig)
+{
+    currLFConfig = lfconfig;
+    QVariantMap config = configMap["set config"].toMap();
+    QString cmd = config["cmd"].toString();
+    cmd.replace("<divisor>", QString::number(currLFConfig.divisor));
+    cmd.replace("<bits per sample>", QString::number(currLFConfig.bitsPerSample));
+    cmd.replace("<decimation>", QString::number(currLFConfig.decimation));
+    cmd.replace("<averaging>", currLFConfig.averaging ? "1" : "0");
+    cmd.replace("<trigger threshold>", QString::number(currLFConfig.triggerThreshold));
+    cmd.replace("<samples to skip>", QString::number(currLFConfig.samplesToSkip));
+    util->execCMDWithOutput(cmd, 500);
+    cmd = config["divisor cmd"].toString();
+    cmd.replace("<divisor>", QString::number(currLFConfig.divisor));
+    util->execCMDWithOutput(cmd, 500);
+}
+
+void LF::resetLFConfig()
+{
+    setLFConfig(defaultLFConfig);
+    getLFConfig();
+}
+
+float LF::divisor2Freq(uint8_t divisor)
+{
+    return (12000.0 / (divisor + 1.0));
+}
+
+uint8_t LF::freq2Divisor(float freq)
+{
+    return ((uint16_t)(12000.0 / freq + 0.5) - 1); // uint16_t for (divisor + 1) = 256
+}
+
+void LF::syncWithUI()
+{
+    ui->LF_LFConf_freqDivisorBox->setValue(currLFConfig.divisor); // will trigger valueChanged()
+    ui->LF_LFConf_bitsPerSampleBox->setValue(currLFConfig.bitsPerSample);
+    ui->LF_LFConf_decimationBox->setValue(currLFConfig.decimation);
+    ui->LF_LFConf_averagingBox->setChecked(currLFConfig.averaging);
+    ui->LF_LFConf_thresholdBox->setValue(currLFConfig.triggerThreshold);
+    ui->LF_LFConf_skipsBox->setValue(currLFConfig.samplesToSkip);
+}
+
+void LF::setConfigMap(const QVariantMap& configMap)
+{
+    this->configMap = configMap;
+    qDebug() << configMap;
+}

module/lf.h

@@ -0,0 +1,59 @@
+#ifndef LF_H
+#define LF_H
+
+#include <QObject>
+
+#include "common/util.h"
+#include "ui_mainwindow.h"
+
+class LF : public QObject
+{
+    Q_OBJECT
+public:
+    explicit LF(Ui::MainWindow *ui, Util *addr, QWidget *parent = nullptr);
+
+    struct LFConfig
+    {
+        uint8_t divisor;
+        uint8_t bitsPerSample;
+        uint8_t decimation;
+        bool averaging;
+        uint8_t triggerThreshold;
+        uint16_t samplesToSkip;
+    };
+
+    static constexpr LFConfig defaultLFConfig =
+    {
+        95,
+        8,
+        1,
+        true,
+        0,
+        0
+    };
+
+    void read();
+    void sniff();
+    void search();
+    void tune();
+    void getLFConfig();
+    void setLFConfig(LF::LFConfig lfconfig);
+    void resetLFConfig();
+    static float divisor2Freq(uint8_t divisor);
+    static uint8_t freq2Divisor(float freq);
+
+    void setConfigMap(const QVariantMap &configMap);
+private:
+    QWidget* parent;
+    Ui::MainWindow *ui;
+    Util* util;
+    LFConfig currLFConfig;
+    QRegularExpression* LFconfigPattern;
+    QVariantMap configMap;
+    void syncWithUI();
+    bool getLFConfig_helper(const QVariantMap& map, QString& str, int* result);
+signals:
+
+};
+
+#endif // LF_H

module/mifare.h

@@ -11,6 +11,7 @@
 #include <QStringList>
 #include <QRegularExpression>
 #include <QMessageBox>
+#include <QJsonObject>
 class Mifare : public QObject
 {
     Q_OBJECT
@@ -37,6 +38,7 @@ public:
         quint16 block_size;
         quint8 blk[40];
         quint8 blks[40];
+        QString typeText;
     };
 
     enum AccessType
@@ -63,17 +65,18 @@ public:
     static const AccessType trailerReadCondition[8][3];
     static const AccessType trailerWriteCondition[8][3];
 
-    QString info(bool isRequiringOutput = false);
+    QMap<QString, QString> info(bool isRequiringOutput = false);
     void chk();
-    void nested();
+    void nested(bool isStaticNested = false);
+    void darkside();
     void hardnested();
     void sniff();
-    void snoop();
+    void sniff14a();
     void list();
     void readOne(TargetType targetType = TARGET_MIFARE);
     void readSelected(TargetType targetType = TARGET_MIFARE);
     void writeOne(TargetType targetType = TARGET_MIFARE);
-    QList<int> writeSelected(TargetType targetType = TARGET_MIFARE);
+    void writeSelected(TargetType targetType = TARGET_MIFARE);
     void dump();
     void restore();
 
@@ -108,6 +111,10 @@ public:
 
     static QList<quint8> data_getACBits(const QString& text);
     static int data_b2s(int block);
+    static bool data_isACBitsValid(const QString& text, QList<quint8> *returnHalfBytes = nullptr);
+    QString data_getUID();
+    quint16 getTrailerBlockId(quint8 sectorId, qint8 cardTypeId = -1); // -1: use current cardtype
+    void setConfigMap(const QVariantMap& configMap);
 public slots:
 signals:
 
@@ -116,6 +123,8 @@ private:
     Ui::MainWindow *ui;
     Util* util;
 
+    QVariantMap configMap;
+
     QStringList* keyAList;
     QStringList* keyBList;
     QStringList* dataList;

ui/mainwindow.cpp

@@ -1,13 +1,22 @@
 #include "mainwindow.h"
 #include "ui_mainwindow.h"
 
+#include <QJsonDocument>
+
 MainWindow::MainWindow(QWidget *parent):
     QMainWindow(parent)
     , ui(new Ui::MainWindow)
 {
     ui->setupUi(this);
+    dockAllWindows = new QAction(tr("Dock all windows"), this);
     myInfo = new QAction("wh201906", this);
+    currVersion = new QAction(tr("Ver: ") + QApplication::applicationVersion().section('.', 0, -2), this); // ignore the 4th version number
     checkUpdate = new QAction(tr("Check Update"), this);
+    connect(dockAllWindows, &QAction::triggered, [ = ]()
+    {
+        for(int i = 0; i < dockList.size(); i++)
+            dockList[i]->setFloating(false);
+    });
     connect(myInfo, &QAction::triggered, [ = ]()
     {
         QDesktopServices::openUrl(QUrl("https://github.com/wh201906"));
@@ -16,18 +25,40 @@ MainWindow::MainWindow(QWidget *parent):
     {
         QDesktopServices::openUrl(QUrl("https://github.com/wh201906/Proxmark3GUI/releases"));
     });
-    this->addAction(myInfo);
-    this->addAction(checkUpdate);
 
     settings = new QSettings("GUIsettings.ini", QSettings::IniFormat);
+    settings->setIniCodec("UTF-8");
 
     pm3Thread = new QThread(this);
     pm3 = new PM3Process(pm3Thread);
     pm3Thread->start();
     pm3state = false;
+    clientWorkingDir = new QDir;
 
     util = new Util(this);
+    Util::setUI(ui);
     mifare = new Mifare(ui, util, this);
+    lf = new LF(ui, util, this);
+
+    keyEventFilter = new MyEventFilter(QEvent::KeyPress);
+    resizeEventFilter = new MyEventFilter(QEvent::Resize);
+
+    // hide unused tabs
+//    ui->funcTab->removeTab(1);
+    ui->funcTab->removeTab(2);
+
+    portSearchTimer = new QTimer(this);
+    portSearchTimer->setInterval(2000);
+    connect(portSearchTimer, &QTimer::timeout, this, &MainWindow::on_portSearchTimer_timeout);
+    portSearchTimer->start();
+
+    contextMenu = new QMenu();
+    contextMenu->addAction(dockAllWindows);
+    contextMenu->addSeparator();
+    contextMenu->addAction(myInfo);
+    currVersion->setEnabled(false);
+    contextMenu->addAction(currVersion);
+    contextMenu->addAction(checkUpdate);
 
 }
 
@@ -41,62 +72,137 @@ MainWindow::~MainWindow()
     delete pm3Thread;
 }
 
+void MainWindow::loadConfig()
+{
+    QFile configList(ui->Set_Client_configPathEdit->text());
+    if(!configList.open(QFile::ReadOnly | QFile::Text))
+    {
+        QMessageBox::information(this, tr("Info"), tr("Failed to load config file"));
+        return;
+    }
+
+    QByteArray configData = configList.readAll();
+    QJsonDocument configJson(QJsonDocument::fromJson(configData));
+    mifare->setConfigMap(configJson.object()["mifare classic"].toObject().toVariantMap());
+    lf->setConfigMap(configJson.object()["lf"].toObject().toVariantMap());
+
+}
+
 void MainWindow::initUI() // will be called by main.app
 {
     ui->retranslateUi(this);
     uiInit();
     signalInit();
     setState(false);
+    dockInit();
 }
 
 // ******************** basic functions ********************
 
-void MainWindow::on_PM3_refreshPortButton_clicked()
+void MainWindow::on_portSearchTimer_timeout()
 {
-    ui->PM3_portBox->clear();
-    QSerialPort serial;
-    QStringList serialList;
+    QStringList newPortList;
     foreach(const QSerialPortInfo &info, QSerialPortInfo::availablePorts())
     {
-        qDebug() << info.isBusy() << info.isNull() << info.portName();
-        serial.setPort(info);
-
-        if(serial.open(QIODevice::ReadWrite))
-        {
-            serialList << info.portName();
-            serial.close();
+//        qDebug() << info.isBusy() << info.isNull() << info.portName() << info.description();
+        if(!info.isNull())
+            newPortList << info.portName();
     }
-    }
-    foreach(QString port, serialList)
+    if(newPortList != portList) // update PM3_portBox when available ports changed
     {
-        ui->PM3_portBox->addItem(port);
+        portList = newPortList;
+        ui->PM3_portBox->clear();
+        ui->PM3_portBox->addItems(portList);
     }
 }
 
 void MainWindow::on_PM3_connectButton_clicked()
 {
     qDebug() << "Main:" << QThread::currentThread();
+
     QString port = ui->PM3_portBox->currentText();
-    if(port == "")
-        QMessageBox::information(NULL, tr("Info"), tr("Plz choose a port first"), QMessageBox::Ok);
-    else
+    QString startArgs = ui->Set_Client_startArgsEdit->text();
+
+    // on RRG repo, if no port is specified, the client will search the available port
+    if(port == "" && startArgs.contains("<port>")) // has <port>, no port
     {
-        saveClientPath(ui->PM3_pathEdit->text());
-        emit connectPM3(ui->PM3_pathEdit->text(), port);
-    }
+        QMessageBox::information(this, tr("Info"), tr("Plz choose a port first"), QMessageBox::Ok);
+        return;
     }
 
-void MainWindow::onPM3StateChanged(bool st, QString info)
+    if(!startArgs.contains("<port>")) // no <port>
+        port = ""; // a symbol
+
+    QStringList args = startArgs.replace("<port>", port).split(' ');
+    saveClientPath(ui->PM3_pathEdit->text());
+
+    QProcess envSetProcess;
+    QFileInfo envScriptPath(ui->Set_Client_envScriptEdit->text());
+    if(envScriptPath.exists())
+    {
+        qDebug() << envScriptPath.absoluteFilePath();
+        // use the shell session to keep the environment then read it
+#ifdef Q_OS_WIN
+        // cmd /c "<path>">>nul && set
+        envSetProcess.start("cmd", {}, QProcess::Unbuffered | QProcess::ReadWrite | QProcess::Text);
+        envSetProcess.write(QString("\"" + envScriptPath.absoluteFilePath() + "\">>nul\n").toLatin1());
+        envSetProcess.waitForReadyRead(10000);
+        envSetProcess.readAll();
+        envSetProcess.write("set\n");
+#else
+        // need implementation(or test if space works)
+        // sh -c '. "<path>">>/dev/null && env'
+        envSetProcess.start("sh -c \' . \"" + envScriptPath.absoluteFilePath() + "\">>/dev/null && env");
+#endif
+        envSetProcess.waitForReadyRead(10000);
+        QString envSetResult = QString(envSetProcess.readAll());
+#if (QT_VERSION <= QT_VERSION_CHECK(5,14,0))
+        clientEnv = envSetResult.split("\n", QString::SkipEmptyParts);
+#else
+        clientEnv = envSetResult.split("\n", Qt::SkipEmptyParts);
+#endif
+        if(clientEnv.size() > 2) // the first element is "set" and the last element is the current path
+        {
+            clientEnv.removeFirst();
+            clientEnv.removeLast();
+            emit setProcEnv(&clientEnv);
+        }
+//      qDebug() << "Get Env List" << clientEnv;
+    }
+    else
+        clientEnv.clear();
+
+    clientWorkingDir->setPath(QApplication::applicationDirPath());
+    qDebug() << clientWorkingDir->absolutePath();
+    clientWorkingDir->mkpath(ui->Set_Client_workingDirEdit->text());
+    qDebug() << clientWorkingDir->absolutePath();
+    clientWorkingDir->cd(ui->Set_Client_workingDirEdit->text());
+    qDebug() << clientWorkingDir->absolutePath();
+    emit setWorkingDir(clientWorkingDir->absolutePath());
+
+    loadConfig();
+    emit connectPM3(ui->PM3_pathEdit->text(), args);
+    if(port != "" && !keepClientActive)
+        emit setSerialListener(port, true);
+    else if(!keepClientActive)
+        emit setSerialListener(false);
+
+    envSetProcess.kill();
+}
+
+void MainWindow::onPM3StateChanged(bool st, const QString& info)
 {
     pm3state = st;
     setState(st);
     if(st == true)
     {
+        portSearchTimer->stop();
         setStatusBar(PM3VersionBar, info);
         setStatusBar(connectStatusBar, tr("Connected"));
     }
     else
     {
+        portSearchTimer->start();
         setStatusBar(PM3VersionBar, "");
         setStatusBar(connectStatusBar, tr("Not Connected"));
     }
@@ -104,31 +210,43 @@ void MainWindow::onPM3StateChanged(bool st, QString info)
 
 void MainWindow::on_PM3_disconnectButton_clicked()
 {
-    pm3state = false;
-    setState(false);
     emit killPM3();
-    emit setSerialListener("", false);
-    setStatusBar(connectStatusBar, tr("Not Connected"));
+    emit setSerialListener(false);
 }
 
 void MainWindow::refreshOutput(const QString& output)
 {
 //    qDebug() << "MainWindow::refresh:" << output;
-    ui->Raw_outputEdit->insertPlainText(output);
+    ui->Raw_outputEdit->appendPlainText(output);
     ui->Raw_outputEdit->moveCursor(QTextCursor::End);
 }
 
-void MainWindow::refreshCMD(const QString& cmd)
+void MainWindow::on_stopButton_clicked()
 {
-    ui->Raw_CMDEdit->setText(cmd);
-    if(cmd != "" && (ui->Raw_CMDHistoryWidget->count() == 0 || ui->Raw_CMDHistoryWidget->item(ui->Raw_CMDHistoryWidget->count() - 1)->text() != cmd))
-        ui->Raw_CMDHistoryWidget->addItem(cmd);
+    if(!pm3state)
+        on_PM3_disconnectButton_clicked();
+    else
+    {
+        on_PM3_disconnectButton_clicked();
+        for(int i = 0; i < 10; i++)
+        {
+            util->delay(200);
+            if(!pm3state)
+                break;
+        }
+        emit reconnectPM3();
+        emit setSerialListener(!keepClientActive);
+    }
 }
-
 // *********************************************************
 
 // ******************** raw command ********************
 
+void MainWindow::on_Raw_CMDEdit_textChanged(const QString &arg1)
+{
+    stashedCMDEditText = arg1;
+}
+
 void MainWindow::on_Raw_sendCMDButton_clicked()
 {
     util->execCMD(ui->Raw_CMDEdit->text());
@@ -173,17 +291,81 @@ void MainWindow::sendMSG() // send command when pressing Enter
         on_Raw_sendCMDButton_clicked();
 }
 
+
+void MainWindow::refreshCMD(const QString& cmd)
+{
+    ui->Raw_CMDEdit->blockSignals(true);
+    ui->Raw_CMDEdit->setText(cmd);
+    if(cmd != "" && (ui->Raw_CMDHistoryWidget->count() == 0 || ui->Raw_CMDHistoryWidget->item(ui->Raw_CMDHistoryWidget->count() - 1)->text() != cmd))
+        ui->Raw_CMDHistoryWidget->addItem(cmd);
+    stashedCMDEditText = cmd;
+    stashedIndex = -1;
+    ui->Raw_CMDEdit->blockSignals(false);
+}
+
+void MainWindow::on_Raw_keyPressed(QObject* obj_addr, QEvent& event)
+{
+    if(event.type() == QEvent::KeyPress)
+    {
+        QKeyEvent& keyEvent = static_cast<QKeyEvent&>(event);
+        if(obj_addr == ui->Raw_CMDEdit)
+        {
+            if(keyEvent.key() == Qt::Key_Up)
+            {
+                if(stashedIndex > 0)
+                    stashedIndex--;
+                else if(stashedIndex == -1)
+                    stashedIndex = ui->Raw_CMDHistoryWidget->count() - 1;
+            }
+            else if(keyEvent.key() == Qt::Key_Down)
+            {
+                if(stashedIndex < ui->Raw_CMDHistoryWidget->count() - 1 && stashedIndex != -1)
+                    stashedIndex++;
+                else if(stashedIndex == ui->Raw_CMDHistoryWidget->count() - 1)
+                    stashedIndex = -1;
+            }
+            if(keyEvent.key() == Qt::Key_Up || keyEvent.key() == Qt::Key_Down)
+            {
+                ui->Raw_CMDEdit->blockSignals(true);
+                if(stashedIndex == -1)
+                    ui->Raw_CMDEdit->setText(stashedCMDEditText);
+                else
+                    ui->Raw_CMDEdit->setText(ui->Raw_CMDHistoryWidget->item(stashedIndex)->text());
+                ui->Raw_CMDEdit->blockSignals(false);
+            }
+        }
+        else if(obj_addr == ui->Raw_outputEdit)
+        {
+            if(keyEvent.key() == Qt::Key_Up || keyEvent.key() == Qt::Key_Down)
+                ui->Raw_CMDEdit->setFocus();
+        }
+    }
+}
 // *****************************************************
 
 // ******************** mifare ********************
-void MainWindow::MF_onTypeChanged(int id, bool st)
+void MainWindow::on_MF_keyWidget_resized(QObject* obj_addr, QEvent& event)
 {
-    typeBtnGroup->blockSignals(true);
-    qDebug() << id << typeBtnGroup->checkedId();
+    if(obj_addr == ui->MF_keyWidget && event.type() == QEvent::Resize)
+    {
+        QTableWidget* widget = (QTableWidget*)obj_addr;
+        int keyItemWidth = widget->width();
+        keyItemWidth -= widget->verticalScrollBar()->width();
+        keyItemWidth -= 2 * widget->frameWidth();
+        keyItemWidth -= widget->horizontalHeader()->sectionSize(0);
+        widget->horizontalHeader()->resizeSection(1, keyItemWidth / 2);
+        widget->horizontalHeader()->resizeSection(2, keyItemWidth / 2);
+    }
+}
+
+void MainWindow::MF_onMFCardTypeChanged(int id, bool st)
+{
+    MFCardTypeBtnGroup->blockSignals(true);
+    qDebug() << id << MFCardTypeBtnGroup->checkedId();
     if(!st)
     {
         int result;
-        if(id > typeBtnGroup->checkedId()) // id is specified in uiInit() with a proper order, so I can compare the size by id.
+        if(id > MFCardTypeBtnGroup->checkedId()) // id is specified in uiInit() with a proper order, so I can compare the size by id.
         {
             result = QMessageBox::question(this, tr("Info"), tr("Some of the data and key will be cleared.") + "\n" + tr("Continue?"), QMessageBox::Yes | QMessageBox::No);
         }
@@ -194,7 +376,7 @@ void MainWindow::MF_onTypeChanged(int id, bool st)
         if(result == QMessageBox::Yes)
         {
             qDebug() << "Yes";
-            mifare->setCardType(typeBtnGroup->checkedId());
+            mifare->setCardType(MFCardTypeBtnGroup->checkedId());
             MF_widgetReset();
             mifare->data_syncWithDataWidget();
             mifare->data_syncWithKeyWidget();
@@ -202,10 +384,10 @@ void MainWindow::MF_onTypeChanged(int id, bool st)
         else
         {
             qDebug() << "No";
-            typeBtnGroup->button(id)->setChecked(true);
+            MFCardTypeBtnGroup->button(id)->setChecked(true);
         }
     }
-    typeBtnGroup->blockSignals(false);
+    MFCardTypeBtnGroup->blockSignals(false);
 }
 
 void MainWindow::on_MF_selectAllBox_stateChanged(int arg1)
@@ -457,7 +639,7 @@ void MainWindow::on_MF_File_loadButton_clicked()
     if(ui->MF_File_dataBox->isChecked())
     {
         title = tr("Plz select the data file:");
-        filename = QFileDialog::getOpenFileName(this, title, "./", tr("Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml);;All Files(*.*)"));
+        filename = QFileDialog::getOpenFileName(this, title, "./", tr("Binary Data Files(*.bin *.dump)") + ";;" + tr("Text Data Files(*.txt *.eml)") + ";;" + tr("All Files(*.*)"));
         qDebug() << filename;
         if(filename != "")
         {
@@ -470,7 +652,7 @@ void MainWindow::on_MF_File_loadButton_clicked()
     else if(ui->MF_File_keyBox->isChecked())
     {
         title = tr("Plz select the key file:");
-        filename = QFileDialog::getOpenFileName(this, title, "./", tr("Binary Key Files(*.bin *.dump);;Binary Data Files(*.bin *.dump);;All Files(*.*)"));
+        filename = QFileDialog::getOpenFileName(this, title, "./", tr("Binary Key Files(*.bin *.dump)") + ";;" + tr("All Files(*.*)"));
         qDebug() << filename;
         if(filename != "")
         {
@@ -489,15 +671,19 @@ void MainWindow::on_MF_File_saveButton_clicked()
     QString title = "";
     QString filename = "";
     QString selectedType = "";
+    QString defaultName = mifare->data_getUID();
+    if(defaultName != "")
+        defaultName += "_";
+    defaultName += QDateTime::currentDateTime().toString("yyyy-MM-dd-hh-mm-ss");
 
     if(ui->MF_File_dataBox->isChecked())
     {
         title = tr("Plz select the location to save data file:");
-        filename = QFileDialog::getSaveFileName(this, title, "./", tr("Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml)"), &selectedType);
+        filename = QFileDialog::getSaveFileName(this, title, "./data_" + defaultName, tr("Binary Data Files(*.bin *.dump)") + ";;" + tr("Text Data Files(*.txt *.eml)"), &selectedType);
         qDebug() << filename;
         if(filename != "")
         {
-            if(!mifare->data_saveDataFile(filename, selectedType == "Binary Data Files(*.bin *.dump)"))
+            if(!mifare->data_saveDataFile(filename, selectedType == tr("Binary Data Files(*.bin *.dump)")))
             {
                 QMessageBox::information(this, tr("Info"), tr("Failed to save to") + "\n" + filename);
             }
@@ -506,11 +692,11 @@ void MainWindow::on_MF_File_saveButton_clicked()
     else if(ui->MF_File_keyBox->isChecked())
     {
         title = tr("Plz select the location to save key file:");
-        filename = QFileDialog::getSaveFileName(this, title, "./", tr("Binary Key Files(*.bin *.dump)"), &selectedType);
+        filename = QFileDialog::getSaveFileName(this, title, "./key_" + defaultName, tr("Binary Key Files(*.bin *.dump)"), &selectedType);
         qDebug() << filename;
         if(filename != "")
         {
-            if(!mifare->data_saveKeyFile(filename, selectedType == "Binary Key Files(*.bin *.dump)"))
+            if(!mifare->data_saveKeyFile(filename, selectedType == tr("Binary Key Files(*.bin *.dump)")))
             {
                 QMessageBox::information(this, tr("Info"), tr("Failed to save to") + "\n" + filename);
             }
@@ -580,9 +766,8 @@ void MainWindow::on_MF_RW_writeBlockButton_clicked()
 
 void MainWindow::on_MF_RW_writeSelectedButton_clicked()
 {
-    QList<int> failedBlocks;
     setState(false);
-    failedBlocks = mifare->writeSelected(Mifare::TARGET_MIFARE);
+    mifare->writeSelected(Mifare::TARGET_MIFARE);
     setState(true);
 }
 
@@ -612,9 +797,8 @@ void MainWindow::on_MF_UID_readBlockButton_clicked()
 
 void MainWindow::on_MF_UID_writeSelectedButton_clicked()
 {
-    QList<int> failedBlocks;
     setState(false);
-    failedBlocks = mifare->writeSelected(Mifare::TARGET_UID);
+    mifare->writeSelected(Mifare::TARGET_UID);
     setState(true);
 }
 
@@ -672,9 +856,8 @@ void MainWindow::on_MF_Sim_readSelectedButton_clicked()
 
 void MainWindow::on_MF_Sim_writeSelectedButton_clicked()
 {
-    QList<int> failedBlocks;
     setState(false);
-    failedBlocks = mifare->writeSelected(Mifare::TARGET_EMULATOR);
+    mifare->writeSelected(Mifare::TARGET_EMULATOR);
     setState(true);
 }
 
@@ -694,15 +877,16 @@ void MainWindow::on_MF_Sniff_loadButton_clicked() // use a tmp file to support c
     QString filename = "";
 
     title = tr("Plz select the trace file:");
-    filename = QFileDialog::getOpenFileName(this, title, "./", tr("Trace Files(*.trc);;All Files(*.*)"));
+    filename = QFileDialog::getOpenFileName(this, title, clientWorkingDir->absolutePath(), tr("Trace Files(*.trc)") + ";;" + tr("All Files(*.*)"));
     qDebug() << filename;
     if(filename != "")
     {
         QString tmpFile = "tmp" + QString::number(QDateTime::currentDateTime().toTime_t()) + ".trc";
-        if(QFile::copy(filename, "./" + tmpFile))
+        if(QFile::copy(filename, clientWorkingDir->absolutePath() + "/" + tmpFile))
         {
             mifare->loadSniff(tmpFile);
-            QFile::remove("./" + tmpFile);
+            util->delay(3000);
+            QFile::remove(clientWorkingDir->absolutePath() + "/" + tmpFile);
         }
         else
         {
@@ -717,17 +901,23 @@ void MainWindow::on_MF_Sniff_saveButton_clicked()
     QString filename = "";
 
     title = tr("Plz select the location to save trace file:");
-    filename = QFileDialog::getSaveFileName(this, title, "./", tr("Trace Files(*.trc)"));
+    filename = QFileDialog::getSaveFileName(this, title, clientWorkingDir->absolutePath(), tr("Trace Files(*.trc)"));
     qDebug() << filename;
     if(filename != "")
     {
         QString tmpFile = "tmp" + QString::number(QDateTime::currentDateTime().toTime_t()) + ".trc";
         mifare->saveSniff(tmpFile);
-        if(!QFile::copy("./" + tmpFile, filename))
+        for(int i = 0; i < 100; i++)
+        {
+            util->delay(100);
+            if(QFile::exists(clientWorkingDir->absolutePath() + "/" + tmpFile))
+                break;
+        }
+        if(!QFile::copy(clientWorkingDir->absolutePath() + "/" + tmpFile, filename))
         {
             QMessageBox::information(this, tr("Info"), tr("Failed to save to") + "\n" + filename);
         }
-        QFile::remove("./" + tmpFile);
+        QFile::remove(clientWorkingDir->absolutePath() + "/" + tmpFile);
     }
 
 }
@@ -739,10 +929,10 @@ void MainWindow::on_MF_Sniff_sniffButton_clicked()
     setState(true);
 }
 
-void MainWindow::on_MF_Sniff_snoopButton_clicked()
+void MainWindow::on_MF_14aSniff_snoopButton_clicked()
 {
     setState(false);
-    mifare->snoop();
+    mifare->sniff14a();
     setState(true);
 }
 
@@ -755,6 +945,7 @@ void MainWindow::MF_widgetReset()
 {
     int secs = mifare->cardType.sector_size;
     int blks = mifare->cardType.block_size;
+    QBrush trailerItemForeColor = QBrush(QColor(0, 160, 255));
     ui->MF_RW_blockBox->clear();
     ui->MF_keyWidget->setRowCount(secs);
     ui->MF_dataWidget->setRowCount(blks);
@@ -779,8 +970,10 @@ void MainWindow::MF_widgetReset()
         setTableItem(ui->MF_keyWidget, i, 1, "");
         setTableItem(ui->MF_keyWidget, i, 2, "");
         setTableItem(ui->MF_dataWidget, mifare->cardType.blks[i], 0, QString::number(i));
+        ui->MF_dataWidget->item(mifare->cardType.blks[i] + mifare->cardType.blk[i] - 1, 2)->setForeground(trailerItemForeColor);
         ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(Qt::Checked);
     }
+    ui->MF_dataWidget->item(0, 2)->setForeground(QBrush(QColor(255, 160, 0)));
     ui->MF_selectAllBox->setCheckState(Qt::Checked);
     ui->MF_selectTrailerBox->setCheckState(Qt::Checked);
 
@@ -796,43 +989,38 @@ void MainWindow::MF_widgetReset()
 
 void MainWindow::uiInit()
 {
-    connect(ui->Raw_CMDEdit, &QLineEdit::editingFinished, this, &MainWindow::sendMSG);
+    connect(ui->Raw_CMDEdit, &QLineEdit::returnPressed, this, &MainWindow::sendMSG);
+    ui->Raw_CMDEdit->installEventFilter(keyEventFilter);
+    connect(keyEventFilter, &MyEventFilter::eventHappened, this, &MainWindow::on_Raw_keyPressed);
+    ui->MF_keyWidget->installEventFilter(resizeEventFilter);
+    connect(resizeEventFilter, &MyEventFilter::eventHappened, this, &MainWindow::on_MF_keyWidget_resized);
+    ui->Raw_outputEdit->installEventFilter(keyEventFilter);
 
     connectStatusBar = new QLabel(this);
     programStatusBar = new QLabel(this);
     PM3VersionBar = new QLabel(this);
+    stopButton = new QPushButton(this);
     setStatusBar(connectStatusBar, tr("Not Connected"));
     setStatusBar(programStatusBar, tr("Idle"));
     setStatusBar(PM3VersionBar, "");
+    stopButton->setText(tr("Stop"));
     ui->statusbar->addPermanentWidget(PM3VersionBar, 1);
     ui->statusbar->addPermanentWidget(connectStatusBar, 1);
     ui->statusbar->addPermanentWidget(programStatusBar, 1);
+    ui->statusbar->addPermanentWidget(stopButton);
 
-    ui->MF_dataWidget->setColumnCount(3);
-    ui->MF_dataWidget->setHorizontalHeaderItem(0, new QTableWidgetItem(tr("Sec")));
-    ui->MF_dataWidget->setHorizontalHeaderItem(1, new QTableWidgetItem(tr("Blk")));
-    ui->MF_dataWidget->setHorizontalHeaderItem(2, new QTableWidgetItem(tr("Data")));
-    ui->MF_dataWidget->verticalHeader()->setVisible(false);
     ui->MF_dataWidget->setColumnWidth(0, 55);
     ui->MF_dataWidget->setColumnWidth(1, 55);
-    ui->MF_dataWidget->setColumnWidth(2, 430);
 
-    ui->MF_keyWidget->setColumnCount(3);
-    ui->MF_keyWidget->setHorizontalHeaderItem(0, new QTableWidgetItem(tr("Sec")));
-    ui->MF_keyWidget->setHorizontalHeaderItem(1, new QTableWidgetItem(tr("KeyA")));
-    ui->MF_keyWidget->setHorizontalHeaderItem(2, new QTableWidgetItem(tr("KeyB")));
-    ui->MF_keyWidget->verticalHeader()->setVisible(false);
-    ui->MF_keyWidget->setColumnWidth(0, 35);
-    ui->MF_keyWidget->setColumnWidth(1, 115);
-    ui->MF_keyWidget->setColumnWidth(2, 115);
+    ui->MF_keyWidget->setColumnWidth(0, 45);
 
     MF_widgetReset();
-    typeBtnGroup = new QButtonGroup(this);
-    typeBtnGroup->addButton(ui->MF_Type_miniButton, 0);
-    typeBtnGroup->addButton(ui->MF_Type_1kButton, 1);
-    typeBtnGroup->addButton(ui->MF_Type_2kButton, 2);
-    typeBtnGroup->addButton(ui->MF_Type_4kButton, 4);
-    connect(typeBtnGroup, QOverload<int, bool>::of(&QButtonGroup::buttonToggled), this, &MainWindow::MF_onTypeChanged);
+    MFCardTypeBtnGroup = new QButtonGroup(this);
+    MFCardTypeBtnGroup->addButton(ui->MF_Type_miniButton, 0);
+    MFCardTypeBtnGroup->addButton(ui->MF_Type_1kButton, 1);
+    MFCardTypeBtnGroup->addButton(ui->MF_Type_2kButton, 2);
+    MFCardTypeBtnGroup->addButton(ui->MF_Type_4kButton, 4);
+    connect(MFCardTypeBtnGroup, QOverload<int, bool>::of(&QButtonGroup::buttonToggled), this, &MainWindow::MF_onMFCardTypeChanged);
 
     ui->MF_keyWidget->installEventFilter(this);
     ui->MF_dataWidget->installEventFilter(this);
@@ -863,11 +1051,31 @@ void MainWindow::uiInit()
     ui->PM3_pathEdit->setText(settings->value("path", "proxmark3").toString());
     settings->endGroup();
 
+    settings->beginGroup("Client_Args");
+    ui->Set_Client_startArgsEdit->setText(settings->value("args", "<port> -f").toString());
+    settings->endGroup();
+
+    settings->beginGroup("Client_forceButtonsEnabled");
+    keepButtonsEnabled = settings->value("state", false).toBool();
+    ui->Set_Client_forceEnabledBox->setChecked(keepButtonsEnabled);
+    settings->endGroup();
+
+    settings->beginGroup("Client_keepClientActive");
+    keepClientActive = settings->value("state", false).toBool();
+    ui->Set_Client_keepClientActiveBox->setChecked(keepClientActive);
+    settings->endGroup();
+
+    settings->beginGroup("Client_Env");
+    ui->Set_Client_envScriptEdit->setText(settings->value("scriptPath").toString());
+    ui->Set_Client_workingDirEdit->setText(settings->value("workingDir", "../data").toString());
+    ui->Set_Client_configPathEdit->setText(settings->value("configPath", "config.json").toString());
+    settings->endGroup();
+
     ui->MF_RW_keyTypeBox->addItem("A", Mifare::KEY_A);
     ui->MF_RW_keyTypeBox->addItem("B", Mifare::KEY_B);
 
     on_Raw_CMDHistoryBox_stateChanged(Qt::Unchecked);
-    on_PM3_refreshPortButton_clicked();
+
 }
 
 void MainWindow::signalInit()
@@ -877,8 +1085,14 @@ void MainWindow::signalInit()
     connect(util, &Util::refreshOutput, this, &MainWindow::refreshOutput);
 
     connect(this, &MainWindow::connectPM3, pm3, &PM3Process::connectPM3);
+    connect(this, &MainWindow::reconnectPM3, pm3, &PM3Process::reconnectPM3);
     connect(pm3, &PM3Process::PM3StatedChanged, this, &MainWindow::onPM3StateChanged);
-    connect(this, &MainWindow::killPM3, pm3, &PM3Process::kill);
+    connect(pm3, &PM3Process::PM3StatedChanged, util, &Util::setRunningState);
+    connect(this, &MainWindow::killPM3, pm3, &PM3Process::killPM3);
+    connect(this, &MainWindow::setProcEnv, pm3, &PM3Process::setProcEnv);
+    connect(this, &MainWindow::setWorkingDir, pm3, &PM3Process::setWorkingDir);
+    connect(this, QOverload<bool>::of(&MainWindow::setSerialListener), pm3, QOverload<bool>::of(&PM3Process::setSerialListener));
+    connect(this, QOverload<const QString&, bool>::of(&MainWindow::setSerialListener), pm3, QOverload<const QString&, bool>::of(&PM3Process::setSerialListener));
 
     connect(util, &Util::write, pm3, &PM3Process::write);
 
@@ -889,6 +1103,8 @@ void MainWindow::signalInit()
     connect(ui->MF_UIDGroupBox, &QGroupBox::clicked, this, &MainWindow::on_GroupBox_clicked);
     connect(ui->MF_simGroupBox, &QGroupBox::clicked, this, &MainWindow::on_GroupBox_clicked);
     connect(ui->MF_sniffGroupBox, &QGroupBox::clicked, this, &MainWindow::on_GroupBox_clicked);
+
+    connect(stopButton, &QPushButton::clicked, this, &MainWindow::on_stopButton_clicked);
 }
 
 void MainWindow::setStatusBar(QLabel * target, const QString& text)
@@ -959,6 +1175,11 @@ void MainWindow::setState(bool st)
     {
         setStatusBar(programStatusBar, tr("Idle"));
     }
+    setButtonsEnabled(st || keepButtonsEnabled);
+}
+
+void MainWindow::setButtonsEnabled(bool st)
+{
     ui->MF_attackGroupBox->setEnabled(st);
     ui->MF_normalGroupBox->setEnabled(st);
     ui->MF_UIDGroupBox->setEnabled(st);
@@ -966,6 +1187,8 @@ void MainWindow::setState(bool st)
     ui->MF_sniffGroupBox->setEnabled(st);
     ui->Raw_CMDEdit->setEnabled(st);
     ui->Raw_sendCMDButton->setEnabled(st);
+    ui->LF_LFconfigGroupBox->setEnabled(st);
+    ui->LF_operationGroupBox->setEnabled(st);
 }
 
 void MainWindow::on_GroupBox_clicked(bool checked)
@@ -993,3 +1216,196 @@ void MainWindow::saveClientPath(const QString& path)
     settings->endGroup();
 }
 // ***********************************************
+
+
+
+void MainWindow::on_MF_Attack_darksideButton_clicked()
+{
+    setState(false);
+    mifare->darkside();
+    setState(true);
+}
+
+void MainWindow::on_Set_Client_startArgsEdit_editingFinished()
+{
+    settings->beginGroup("Client_Args");
+    settings->setValue("args", ui->Set_Client_startArgsEdit->text());
+    settings->endGroup();
+}
+
+void MainWindow::on_Set_Client_forceEnabledBox_stateChanged(int arg1)
+{
+    settings->beginGroup("Client_forceButtonsEnabled");
+    keepButtonsEnabled = (arg1 == Qt::Checked);
+    settings->setValue("state", keepButtonsEnabled);
+    settings->endGroup();
+    if(keepButtonsEnabled)
+        setButtonsEnabled(true);
+}
+
+void MainWindow::on_Set_GUI_setLanguageButton_clicked()
+{
+    Util::chooseLanguage(settings, this);
+}
+
+void MainWindow::on_PM3_refreshPortButton_clicked()
+{
+    on_portSearchTimer_timeout();
+}
+
+void MainWindow::on_Set_Client_envScriptEdit_editingFinished()
+{
+    settings->beginGroup("Client_Env");
+    settings->setValue("scriptPath", ui->Set_Client_envScriptEdit->text());
+    settings->endGroup();
+}
+
+void MainWindow::on_Set_Client_workingDirEdit_editingFinished()
+{
+    settings->beginGroup("Client_Env");
+    settings->setValue("workingDir", ui->Set_Client_workingDirEdit->text());
+    settings->endGroup();
+}
+
+
+void MainWindow::on_Set_Client_configPathEdit_editingFinished()
+{
+    settings->beginGroup("Client_Env");
+    settings->setValue("configPath", ui->Set_Client_configPathEdit->text());
+    settings->endGroup();
+}
+
+void MainWindow::on_Set_Client_keepClientActiveBox_stateChanged(int arg1)
+{
+    settings->beginGroup("Client_keepClientActive");
+    keepClientActive = (arg1 == Qt::Checked);
+    settings->setValue("state", keepClientActive);
+    settings->endGroup();
+    emit setSerialListener(!keepClientActive);
+}
+
+void MainWindow::on_LF_LFConf_freqSlider_valueChanged(int value)
+{
+    onLFfreqConfChanged(value, true);
+}
+
+void MainWindow::onLFfreqConfChanged(int value, bool isCustomized)
+{
+    ui->LF_LFConf_freqDivisorBox->blockSignals(true);
+    ui->LF_LFConf_freqSlider->blockSignals(true);
+
+    if(isCustomized)
+        ui->LF_LFConf_freqOtherButton->setChecked(true);
+    ui->LF_LFConf_freqLabel->setText(tr("Actural Freq: ") + QString("%1kHz").arg(LF::divisor2Freq(value), 0, 'f', 3));
+    ui->LF_LFConf_freqDivisorBox->setValue(value);
+    ui->LF_LFConf_freqSlider->setValue(value);
+
+    ui->LF_LFConf_freqDivisorBox->blockSignals(false);
+    ui->LF_LFConf_freqSlider->blockSignals(false);
+}
+
+void MainWindow::on_LF_LFConf_freqDivisorBox_valueChanged(int arg1)
+{
+    onLFfreqConfChanged(arg1, true);
+}
+
+void MainWindow::on_LF_LFConf_freq125kButton_clicked()
+{
+    onLFfreqConfChanged(95, false);
+}
+
+void MainWindow::on_LF_LFConf_freq134kButton_clicked()
+{
+    onLFfreqConfChanged(88, false);
+}
+
+void MainWindow::on_LF_Op_searchButton_clicked()
+{
+    setState(false);
+    lf->search();
+    setState(true);
+}
+
+void MainWindow::on_LF_Op_readButton_clicked()
+{
+    setState(false);
+    lf->read();
+    setState(true);
+}
+
+void MainWindow::on_LF_Op_tuneButton_clicked()
+{
+    setState(false);
+    lf->tune();
+    setState(true);
+}
+
+void MainWindow::on_LF_Op_sniffButton_clicked()
+{
+    setState(false);
+    lf->sniff();
+    setState(true);
+}
+
+void MainWindow::dockInit()
+{
+    setDockNestingEnabled(true);
+    QDockWidget* dock;
+    QWidget* widget;
+    int count = ui->funcTab->count();
+    qDebug() << "dock count" << count;
+    for(int i = 0; i < count; i++)
+    {
+        dock = new QDockWidget(ui->funcTab->tabText(0), this);
+        qDebug() << "dock name" << ui->funcTab->tabText(0);
+        dock->setFeatures(QDockWidget::DockWidgetFloatable | QDockWidget::DockWidgetMovable);// movable is necessary, otherwise the dock cannot be dragged
+        dock->setAllowedAreas(Qt::BottomDockWidgetArea);
+        dock->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Expanding);
+        widget = ui->funcTab->widget(0);
+        dock->setWidget(widget);
+        if(widget->objectName() == "rawTab")
+            Util::setRawTab(dock, i);
+        addDockWidget(Qt::BottomDockWidgetArea, dock);
+        if(!dockList.isEmpty())
+            tabifyDockWidget(dockList[0], dock);
+        dockList.append(dock);
+    }
+    ui->funcTab->setVisible(false);
+    dockList[0]->setVisible(true);
+    dockList[0]->raise();
+}
+
+void MainWindow::contextMenuEvent(QContextMenuEvent *event)
+{
+    contextMenu->exec(event->globalPos());
+}
+
+void MainWindow::on_LF_LFConf_getButton_clicked()
+{
+    setState(false);
+    lf->getLFConfig();
+    setState(true);
+}
+
+void MainWindow::on_LF_LFConf_setButton_clicked()
+{
+    LF::LFConfig config;
+    setState(false);
+    config.divisor = ui->LF_LFConf_freqDivisorBox->value();
+    config.bitsPerSample = ui->LF_LFConf_bitsPerSampleBox->value();
+    config.decimation = ui->LF_LFConf_decimationBox->value();
+    config.averaging = ui->LF_LFConf_averagingBox->isChecked();
+    config.triggerThreshold = ui->LF_LFConf_thresholdBox->value();
+    config.samplesToSkip = ui->LF_LFConf_skipsBox->value();
+    lf->setLFConfig(config);
+    Util::gotoRawTab();
+    setState(true);
+}
+
+void MainWindow::on_LF_LFConf_resetButton_clicked()
+{
+    setState(false);
+    lf->resetLFConfig();
+    setState(true);
+}
+

ui/mainwindow.h

@@ -19,9 +19,18 @@
 #include <QGroupBox>
 #include <QSizePolicy>
 #include <QSettings>
+#include <QPushButton>
+#include <QProcessEnvironment>
+#include <QScrollBar>
+#include <QTimer>
+#include <QDateTime>
+#include <QDockWidget>
+#include <QMenu>
 
+#include "common/myeventfilter.h"
 #include "common/pm3process.h"
 #include "module/mifare.h"
+#include "module/lf.h"
 #include "common/util.h"
 #include "ui/mf_trailerdecoderdialog.h"
 
@@ -46,8 +55,10 @@ public slots:
     void refreshOutput(const QString& output);
     void refreshCMD(const QString& cmd);
     void setStatusBar(QLabel* target, const QString& text);
-    void onPM3StateChanged(bool st, QString info);
-    void MF_onTypeChanged(int id, bool st);
+    void onPM3StateChanged(bool st, const QString& info);
+    void MF_onMFCardTypeChanged(int id, bool st);
+    void on_Raw_keyPressed(QObject *obj_addr, QEvent &event);
+    void on_MF_keyWidget_resized(QObject *obj_addr, QEvent &event);
 private slots:
 
     void on_PM3_connectButton_clicked();
@@ -59,7 +70,8 @@ private slots:
     void on_Raw_clearOutputButton_clicked();
 
     void sendMSG();
-    void on_PM3_refreshPortButton_clicked();
+
+    void on_portSearchTimer_timeout();
 
     void on_Raw_CMDHistoryBox_stateChanged(int arg1);
 
@@ -87,7 +99,6 @@ private slots:
 
     void on_MF_RW_writeSelectedButton_clicked();
 
-
     void on_MF_RW_dumpButton_clicked();
 
     void on_MF_RW_restoreButton_clicked();
@@ -142,42 +153,114 @@ private slots:
 
     void on_MF_fillKeysButton_clicked();
 
-    void on_MF_Sniff_snoopButton_clicked();
+    void on_MF_14aSniff_snoopButton_clicked();
 
     void on_MF_trailerDecoderButton_clicked();
 
     void on_MF_selectTrailerBox_stateChanged(int arg1);
 
+    void on_stopButton_clicked();
+
+    void on_Raw_CMDEdit_textChanged(const QString &arg1);
+
+    void on_MF_Attack_darksideButton_clicked();
+
+    void on_Set_Client_startArgsEdit_editingFinished();
+
+    void on_Set_Client_forceEnabledBox_stateChanged(int arg1);
+
+    void on_Set_GUI_setLanguageButton_clicked();
+
+    void setButtonsEnabled(bool st);
+
+    void on_PM3_refreshPortButton_clicked();
+
+    void on_Set_Client_envScriptEdit_editingFinished();
+
+    void on_Set_Client_keepClientActiveBox_stateChanged(int arg1);
+
+    void on_LF_LFConf_freqSlider_valueChanged(int value);
+
+    void on_LF_LFConf_freqDivisorBox_valueChanged(int arg1);
+
+    void on_LF_LFConf_freq125kButton_clicked();
+
+    void on_LF_LFConf_freq134kButton_clicked();
+
+    void on_LF_Op_searchButton_clicked();
+
+    void on_LF_Op_readButton_clicked();
+
+    void on_LF_Op_tuneButton_clicked();
+
+    void on_LF_Op_sniffButton_clicked();
+
+    void on_LF_LFConf_getButton_clicked();
+
+    void on_LF_LFConf_setButton_clicked();
+
+    void on_LF_LFConf_resetButton_clicked();
+
+    void on_Set_Client_workingDirEdit_editingFinished();
+
+    void on_Set_Client_configPathEdit_editingFinished();
+
 private:
     Ui::MainWindow* ui;
-    QButtonGroup* typeBtnGroup;
+    QButtonGroup* MFCardTypeBtnGroup;
     QLabel* connectStatusBar;
     QLabel* programStatusBar;
     QLabel* PM3VersionBar;
+    QPushButton* stopButton;
+    QAction* dockAllWindows;
     QAction* myInfo;
+    QAction* currVersion;
     QAction* checkUpdate;
     QSettings* settings;
+    MyEventFilter* keyEventFilter;
+    MyEventFilter* resizeEventFilter;
+
+    QString stashedCMDEditText;
+    int stashedIndex = -1;
 
     void uiInit();
 
     PM3Process* pm3;
     bool pm3state;
+    bool keepButtonsEnabled;
+    bool keepClientActive;
     QThread* pm3Thread;
+    QTimer* portSearchTimer;
+    QStringList portList;
+    QStringList clientEnv;
+    QDir* clientWorkingDir;
 
     Mifare* mifare;
+    LF* lf;
     Util* util;
 
-    MF_trailerDecoderDialog* decDialog;
+    QList<QDockWidget*> dockList;
+    QMenu* contextMenu;
 
+    MF_trailerDecoderDialog* decDialog;
 
     void signalInit();
     void MF_widgetReset();
     void setTableItem(QTableWidget *widget, int row, int column, const QString& text);
     void setState(bool st);
     void saveClientPath(const QString& path);
+    void onLFfreqConfChanged(int value, bool isCustomized);
+    void dockInit();
+    void loadConfig();
+protected:
+    void contextMenuEvent(QContextMenuEvent *event) override;
 signals:
-    void connectPM3(const QString path, const QString port);
+    void connectPM3(const QString& path, const QStringList args);
+    void reconnectPM3();
     void killPM3();
+    void setSerialListener(bool state);
     void setSerialListener(const QString& name, bool state);
+    void setProcEnv(const QStringList *env);
+    void setWorkingDir(const QString& dir);
 };
 #endif // MAINWINDOW_H

ui/mf_attack_hardnesteddialog.cpp

@@ -1,16 +1,17 @@
 #include "mf_attack_hardnesteddialog.h"
 #include "ui_mf_attack_hardnesteddialog.h"
 
-MF_Attack_hardnestedDialog::MF_Attack_hardnestedDialog(int blocks, QWidget *parent) :
+MF_Attack_hardnestedDialog::MF_Attack_hardnestedDialog(int blocks, const QVariantMap& config, QWidget *parent) :
     QDialog(parent),
     ui(new Ui::MF_Attack_hardnestedDialog)
 {
     ui->setupUi(this);
     for(int i = 0; i < blocks; i++)
     {
-        ui->knownKeySectorBox->addItem(QString::number(i));
-        ui->targetKeySectorBox->addItem(QString::number(i));
+        ui->knownKeyBlockBox->addItem(QString::number(i));
+        ui->targetKeyBlockBox->addItem(QString::number(i));
     }
+    this->config = config;
 
 }
 
@@ -21,14 +22,11 @@ MF_Attack_hardnestedDialog::~MF_Attack_hardnestedDialog()
 
 void MF_Attack_hardnestedDialog::on_buttonBox_accepted()
 {
-    emit sendCMD("hf mf hardnested "
-                 + ui->knownKeySectorBox->currentText()
-                 + " "
-                 + ui->knownKeyTypeBox->currentText()
-                 + " "
-                 + ui->knownKeyBox->text()
-                 + " "
-                 + ui->targetKeySectorBox->currentText()
-                 + " "
-                 + ui->targetKeyTypeBox->currentText());
+    QString cmd = config["cmd"].toString();
+    cmd.replace("<known key block>", ui->knownKeyBlockBox->currentText());
+    cmd.replace("<known key type>", config["known key type"].toMap()[ui->knownKeyTypeBox->currentText()].toString());
+    cmd.replace("<known key>", ui->knownKeyBox->text());
+    cmd.replace("<target key block>", ui->targetKeyBlockBox->currentText());
+    cmd.replace("<target key type>", config["target key type"].toMap()[ui->targetKeyTypeBox->currentText()].toString());
+    emit sendCMD(cmd);
 }

ui/mf_attack_hardnesteddialog.h

@@ -2,8 +2,10 @@
 #define MF_ATTACK_HARDNESTEDDIALOG_H
 
 #include <QDialog>
+#include "common/util.h"
 
-namespace Ui {
+namespace Ui
+{
 class MF_Attack_hardnestedDialog;
 }
 
@@ -12,14 +14,15 @@ class MF_Attack_hardnestedDialog : public QDialog
     Q_OBJECT
 
 public:
-    explicit MF_Attack_hardnestedDialog(int blocks, QWidget *parent = nullptr);
+    explicit MF_Attack_hardnestedDialog(int blocks, const QVariantMap& config, QWidget *parent = nullptr);
     ~MF_Attack_hardnestedDialog();
 
 
 private:
     Ui::MF_Attack_hardnestedDialog *ui;
+    QVariantMap config;
 signals:
-    void sendCMD(QString cmd);
+    void sendCMD(const QString& cmd);
 private slots:
     void on_buttonBox_accepted();
 };

ui/mf_attack_hardnesteddialog.ui

@@ -31,7 +31,7 @@
       </widget>
      </item>
      <item>
-      <widget class="QComboBox" name="knownKeySectorBox">
+      <widget class="QComboBox" name="knownKeyBlockBox">
        <property name="minimumSize">
         <size>
          <width>60</width>
@@ -106,7 +106,7 @@
       </widget>
      </item>
      <item>
-      <widget class="QComboBox" name="targetKeySectorBox">
+      <widget class="QComboBox" name="targetKeyBlockBox">
        <property name="minimumSize">
         <size>
          <width>60</width>

ui/mf_sim_simdialog.cpp

@@ -1,12 +1,34 @@
 #include "mf_sim_simdialog.h"
 #include "ui_mf_sim_simdialog.h"
 
-MF_Sim_simDialog::MF_Sim_simDialog(int cardType, QWidget *parent) :
+MF_Sim_simDialog::MF_Sim_simDialog(int cardType, QString cardTypeText, QWidget *parent) :
     QDialog(parent),
     ui(new Ui::MF_Sim_simDialog)
 {
     ui->setupUi(this);
+    if(Util::getClientType() == Util::CLIENTTYPE_OFFICIAL)
+    {
+        ui->atqaGroupBox->setVisible(false);
+        ui->atqaLine->setVisible(false);
+        ui->sakGroupBox->setVisible(false);
+        ui->sakLine->setVisible(false);
+        ui->vGroupBox->setVisible(false);
+        ui->vLine->setVisible(false);
+    }
+    else if(Util::getClientType() == Util::CLIENTTYPE_ICEMAN)
+    {
+        ui->fGroupBox->setVisible(false);
+        ui->fLine->setVisible(false);
+        ui->rGroupBox->setVisible(false);
+        ui->rLine->setVisible(false);
+        ui->uBox->setText("-u");
+        ui->nBox->setText("-n");
+        ui->iBox->setText("-i");
+        ui->xBox->setText("--crack");
+        ui->eBox->setText("-e");
+    }
     this->cardType = cardType;
+    this->cardTypeText = cardTypeText;
 }
 
 MF_Sim_simDialog::~MF_Sim_simDialog()
@@ -55,6 +77,8 @@ void MF_Sim_simDialog::on_fBox_clicked(bool checked)
 void MF_Sim_simDialog::on_buttonBox_accepted()
 {
     QString paras;
+    if(Util::getClientType() == Util::CLIENTTYPE_OFFICIAL)
+    {
         paras += (ui->uBox->isChecked() ? "u " + ui->uEdit->text() + " " : "");
         paras += (ui->nBox->isChecked() ? "n " + ui->nEdit->text() + " " : "");
         paras += (ui->iBox->isChecked() ? "i " : "");
@@ -64,3 +88,16 @@ void MF_Sim_simDialog::on_buttonBox_accepted()
         paras += (ui->rBox->isChecked() ? "r " : "");
         emit sendCMD(QString("hf mf sim ") + "*" + QString::number(cardType) + " " + paras.trimmed());
     }
+    else if(Util::getClientType() == Util::CLIENTTYPE_ICEMAN)
+    {
+        paras += (ui->uBox->isChecked() ? "-u " + ui->uEdit->text() + " " : "");
+        paras += (ui->atqaBox->isChecked() ? "--atqa " + ui->atqaEdit->text() + " " : "");
+        paras += (ui->sakBox->isChecked() ? "--sak " + ui->sakEdit->text() + " " : "");
+        paras += (ui->nBox->isChecked() ? "-n " + ui->nEdit->text() + " " : "");
+        paras += (ui->iBox->isChecked() ? "-i " : "");
+        paras += (ui->xBox->isChecked() ? "--crack " : "");
+        paras += (ui->eBox->isChecked() ? "-e " : "");
+        paras += (ui->vBox->isChecked() ? "-v " : "");
+        emit sendCMD(QString("hf mf sim --") + cardTypeText + " " + paras.trimmed());
+    }
+}

ui/mf_sim_simdialog.h

@@ -3,6 +3,7 @@
 
 #include <QDialog>
 #include <QDebug>
+#include "common/util.h"
 
 namespace Ui
 {
@@ -14,7 +15,7 @@ class MF_Sim_simDialog : public QDialog
     Q_OBJECT
 
 public:
-    explicit MF_Sim_simDialog(int cardType, QWidget *parent = nullptr);
+    explicit MF_Sim_simDialog(int cardType, QString cardTypeText, QWidget *parent = nullptr);
     ~MF_Sim_simDialog();
 
 private slots:
@@ -25,8 +26,9 @@ private slots:
 private:
     Ui::MF_Sim_simDialog *ui;
     int cardType;
+    QString cardTypeText;
 signals:
-    void sendCMD(QString cmd);
+    void sendCMD(const QString& cmd);
 private slots:
     void on_buttonBox_accepted();
 };

ui/mf_sim_simdialog.ui

@@ -7,30 +7,31 @@
     <x>0</x>
     <y>0</y>
     <width>461</width>
-    <height>456</height>
+    <height>524</height>
    </rect>
   </property>
   <property name="windowTitle">
    <string>Simulate</string>
   </property>
   <layout class="QVBoxLayout" name="verticalLayout">
+   <item>
+    <widget class="QGroupBox" name="uGroupBox">
+     <layout class="QHBoxLayout" name="uLayout">
       <property name="spacing">
        <number>5</number>
       </property>
       <property name="leftMargin">
-    <number>5</number>
+       <number>0</number>
       </property>
       <property name="topMargin">
-    <number>5</number>
+       <number>0</number>
       </property>
       <property name="rightMargin">
-    <number>5</number>
+       <number>0</number>
       </property>
       <property name="bottomMargin">
-    <number>5</number>
+       <number>0</number>
       </property>
-   <item>
-    <layout class="QHBoxLayout" name="horizontalLayout">
       <item>
        <widget class="QCheckBox" name="uBox">
         <property name="text">
@@ -71,16 +72,167 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_6">
+    <widget class="Line" name="uLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_2">
+    <widget class="QGroupBox" name="atqaGroupBox">
+     <layout class="QHBoxLayout" name="atqaLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
+      <item>
+       <widget class="QCheckBox" name="atqaBox">
+        <property name="text">
+         <string>--atqa</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QLineEdit" name="atqaEdit">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Fixed" vsizetype="Fixed">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>100</width>
+          <height>16777215</height>
+         </size>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QLabel" name="label_8">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Expanding" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="text">
+         <string>Provide explicit ATQA (2 bytes)</string>
+        </property>
+        <property name="wordWrap">
+         <bool>true</bool>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </item>
+   <item>
+    <widget class="Line" name="atqaLine">
+     <property name="orientation">
+      <enum>Qt::Horizontal</enum>
+     </property>
+    </widget>
+   </item>
+   <item>
+    <widget class="QGroupBox" name="sakGroupBox">
+     <layout class="QHBoxLayout" name="sakLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
+      <item>
+       <widget class="QCheckBox" name="sakBox">
+        <property name="text">
+         <string>--sak</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QLineEdit" name="sakEdit">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Fixed" vsizetype="Fixed">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="maximumSize">
+         <size>
+          <width>100</width>
+          <height>16777215</height>
+         </size>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QLabel" name="label_9">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Expanding" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="text">
+         <string>Provide explicit SAK (1 byte)</string>
+        </property>
+        <property name="wordWrap">
+         <bool>true</bool>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </item>
+   <item>
+    <widget class="Line" name="sakLine">
+     <property name="orientation">
+      <enum>Qt::Horizontal</enum>
+     </property>
+    </widget>
+   </item>
+   <item>
+    <widget class="QGroupBox" name="nGroupBox">
+     <layout class="QHBoxLayout" name="nLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="nBox">
         <property name="text">
@@ -121,16 +273,33 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_5">
+    <widget class="Line" name="nLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_4">
+    <widget class="QGroupBox" name="iGroupBox">
+     <layout class="QHBoxLayout" name="iLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="iBox">
         <property name="text">
@@ -155,16 +324,33 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_4">
+    <widget class="Line" name="iLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_5">
+    <widget class="QGroupBox" name="xGroupBox">
+     <layout class="QHBoxLayout" name="xLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="xBox">
         <property name="text">
@@ -189,16 +375,33 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_3">
+    <widget class="Line" name="xLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_6">
+    <widget class="QGroupBox" name="eGroupBox">
+     <layout class="QHBoxLayout" name="eLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="eBox">
         <property name="text">
@@ -215,7 +418,7 @@
          </sizepolicy>
         </property>
         <property name="text">
-        <string>set keys found from 'reader attack' to emulator memory (implies x and i)</string>
+         <string>set keys found from 'reader attack' to emulator memory (implies x(--crack) and i)</string>
         </property>
         <property name="wordWrap">
          <bool>true</bool>
@@ -223,16 +426,33 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_2">
+    <widget class="Line" name="eLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_3">
+    <widget class="QGroupBox" name="fGroupBox">
+     <layout class="QHBoxLayout" name="fLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="fBox">
         <property name="text">
@@ -273,16 +493,33 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line">
+    <widget class="Line" name="fLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>
     </widget>
    </item>
    <item>
-    <layout class="QHBoxLayout" name="horizontalLayout_7">
+    <widget class="QGroupBox" name="rGroupBox">
+     <layout class="QHBoxLayout" name="rLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
       <item>
        <widget class="QCheckBox" name="rBox">
         <property name="text">
@@ -307,9 +544,61 @@
        </widget>
       </item>
      </layout>
+    </widget>
    </item>
    <item>
-    <widget class="Line" name="line_7">
+    <widget class="Line" name="rLine">
+     <property name="orientation">
+      <enum>Qt::Horizontal</enum>
+     </property>
+    </widget>
+   </item>
+   <item>
+    <widget class="QGroupBox" name="vGroupBox">
+     <layout class="QHBoxLayout" name="vLayout">
+      <property name="spacing">
+       <number>5</number>
+      </property>
+      <property name="leftMargin">
+       <number>0</number>
+      </property>
+      <property name="topMargin">
+       <number>0</number>
+      </property>
+      <property name="rightMargin">
+       <number>0</number>
+      </property>
+      <property name="bottomMargin">
+       <number>0</number>
+      </property>
+      <item>
+       <widget class="QCheckBox" name="vBox">
+        <property name="text">
+         <string>-v</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QLabel" name="label_11">
+        <property name="sizePolicy">
+         <sizepolicy hsizetype="Expanding" vsizetype="Preferred">
+          <horstretch>0</horstretch>
+          <verstretch>0</verstretch>
+         </sizepolicy>
+        </property>
+        <property name="text">
+         <string>verbose output</string>
+        </property>
+        <property name="wordWrap">
+         <bool>true</bool>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </widget>
+   </item>
+   <item>
+    <widget class="Line" name="vLine">
      <property name="orientation">
       <enum>Qt::Horizontal</enum>
      </property>

ui/mf_trailerdecoderdialog.cpp

@@ -15,10 +15,10 @@ MF_trailerDecoderDialog::MF_trailerDecoderDialog(QWidget *parent) :
     sizeGroup->addButton(ui->size4Button, 4);
     sizeGroup->addButton(ui->size16Button, 16);
     connect(sizeGroup, QOverload<int, bool>::of(&QButtonGroup::buttonToggled), this, &MF_trailerDecoderDialog::on_blockSizeChanged);
-    connect(ui->C0Box, &QSpinBox::textChanged, this, &MF_trailerDecoderDialog::on_boxChanged);
-    connect(ui->C1Box, &QSpinBox::textChanged, this, &MF_trailerDecoderDialog::on_boxChanged);
-    connect(ui->C2Box, &QSpinBox::textChanged, this, &MF_trailerDecoderDialog::on_boxChanged);
-    connect(ui->C3Box, &QSpinBox::textChanged, this, &MF_trailerDecoderDialog::on_boxChanged);
+    connect(ui->C0Box, QOverload<int>::of(&QSpinBox::valueChanged), this, &MF_trailerDecoderDialog::on_boxChanged);
+    connect(ui->C1Box, QOverload<int>::of(&QSpinBox::valueChanged), this, &MF_trailerDecoderDialog::on_boxChanged);
+    connect(ui->C2Box, QOverload<int>::of(&QSpinBox::valueChanged), this, &MF_trailerDecoderDialog::on_boxChanged);
+    connect(ui->C3Box, QOverload<int>::of(&QSpinBox::valueChanged), this, &MF_trailerDecoderDialog::on_boxChanged);
 
     ui->dataBlockWidget->setRowCount(3);
     ui->dataBlockWidget->setColumnCount(4);
@@ -85,15 +85,15 @@ void MF_trailerDecoderDialog::on_blockSizeChanged(int id, bool st)
     {
         if(id == 4)
         {
-            ui->dataBlockWidget->verticalHeaderItem(0)->setText("Block0");
-            ui->dataBlockWidget->verticalHeaderItem(1)->setText("Block1");
-            ui->dataBlockWidget->verticalHeaderItem(2)->setText("Block2");
+            ui->dataBlockWidget->verticalHeaderItem(0)->setText(tr("Block") + "0");
+            ui->dataBlockWidget->verticalHeaderItem(1)->setText(tr("Block") + "1");
+            ui->dataBlockWidget->verticalHeaderItem(2)->setText(tr("Block") + "2");
         }
         else if(id == 16)
         {
-            ui->dataBlockWidget->verticalHeaderItem(0)->setText("Block0~4");
-            ui->dataBlockWidget->verticalHeaderItem(1)->setText("Block5~9");
-            ui->dataBlockWidget->verticalHeaderItem(2)->setText("Block10~14");
+            ui->dataBlockWidget->verticalHeaderItem(0)->setText(tr("Block") + "0~4");
+            ui->dataBlockWidget->verticalHeaderItem(1)->setText(tr("Block") + "5~9");
+            ui->dataBlockWidget->verticalHeaderItem(2)->setText(tr("Block") + "10~14");
         }
 
     }
@@ -110,20 +110,20 @@ void MF_trailerDecoderDialog::setTableItem(QTableWidget* widget, int row, int co
     }
     else if(accessType == Mifare::ACC_KEY_A)
     {
-        text = "KeyA";
+        text = tr("KeyA");
     }
     else if(accessType == Mifare::ACC_KEY_B)
     {
-        text = "KeyB";
+        text = tr("KeyB");
     }
     else if(accessType == Mifare::ACC_KEY_AB)
     {
-        text = "KeyA+B";
+        text = tr("KeyA+B");
     }
     widget->item(row, column)->setText(text);
 }
 
-void MF_trailerDecoderDialog::on_boxChanged(const QString &arg1)
+void MF_trailerDecoderDialog::on_boxChanged()
 {
     quint8 ACBits[4];
     ACBits[0] = ui->C0Box->value();

ui/mf_trailerdecoderdialog.h

@@ -27,7 +27,7 @@ private slots:
 
     void on_blockSizeChanged(int id, bool st);
 
-    void on_boxChanged(const QString &arg1);
+    void on_boxChanged();
 private:
     Ui::MF_trailerDecoderDialog *ui;
     QRegularExpressionValidator* validator;

ui/mf_uid_parameterdialog.cpp

@@ -1,7 +1,7 @@
 #include "mf_uid_parameterdialog.h"
 #include "ui_mf_uid_parameterdialog.h"
 
-MF_UID_parameterDialog::MF_UID_parameterDialog(const QString& uid, const QString& atqa, const QString& sak, QWidget *parent) :
+MF_UID_parameterDialog::MF_UID_parameterDialog(const QString& uid, const QString& atqa, const QString& sak, const QVariantMap& config, QWidget *parent) :
     QDialog(parent),
     ui(new Ui::MF_UID_parameterDialog)
 {
@@ -9,6 +9,7 @@ MF_UID_parameterDialog::MF_UID_parameterDialog(const QString& uid, const QString
     ui->UIDLineEdit->setText(uid);
     ui->ATQALineEdit->setText(atqa);
     ui->SAKLineEdit->setText(sak);
+    this->config = config;
 }
 
 MF_UID_parameterDialog::~MF_UID_parameterDialog()
@@ -18,10 +19,9 @@ MF_UID_parameterDialog::~MF_UID_parameterDialog()
 
 void MF_UID_parameterDialog::on_buttonBox_accepted()
 {
-    emit sendCMD("hf mf csetuid "
-                 + ui->UIDLineEdit->text()
-                 + " "
-                 + ui->ATQALineEdit->text()
-                 + " "
-                 + ui->SAKLineEdit->text());
+    QString cmd = config["cmd"].toString();
+    cmd.replace("<uid>", ui->UIDLineEdit->text());
+    cmd.replace("<atqa>", ui->ATQALineEdit->text());
+    cmd.replace("<sak>", ui->SAKLineEdit->text());
+    emit sendCMD(cmd);
 }

ui/mf_uid_parameterdialog.h

@@ -2,8 +2,10 @@
 #define MF_UID_PARAMETERDIALOG_H
 
 #include <QDialog>
+#include "common/util.h"
 
-namespace Ui {
+namespace Ui
+{
 class MF_UID_parameterDialog;
 }
 
@@ -12,13 +14,14 @@ class MF_UID_parameterDialog : public QDialog
     Q_OBJECT
 
 public:
-    explicit MF_UID_parameterDialog(const QString& uid, const QString& atqa, const QString& sak, QWidget *parent = nullptr);
+    explicit MF_UID_parameterDialog(const QString& uid, const QString& atqa, const QString& sak, const QVariantMap& config, QWidget *parent = nullptr);
     ~MF_UID_parameterDialog();
 
 private:
     Ui::MF_UID_parameterDialog *ui;
+    QVariantMap config;
 signals:
-    void sendCMD(QString cmd);
+    void sendCMD(const QString& cmd);
 private slots:
     void on_buttonBox_accepted();
 };