Support Choose Trailer block

lang/en_US.ts

@@ -290,552 +290,554 @@ It could make the whole sector blocked irreversibly!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="76"/>
+        <location filename="../ui/mainwindow.ui" line="82"/>
         <source>Refresh</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="83"/>
+        <location filename="../ui/mainwindow.ui" line="95"/>
         <source>Connect</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="90"/>
+        <location filename="../ui/mainwindow.ui" line="108"/>
         <source>Disconnect</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="109"/>
+        <location filename="../ui/mainwindow.ui" line="127"/>
         <source>Mifare</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="279"/>
+        <location filename="../ui/mainwindow.ui" line="209"/>
+        <source>Select Trailer</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../ui/mainwindow.ui" line="347"/>
         <source>Card Type</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="294"/>
+        <location filename="../ui/mainwindow.ui" line="368"/>
         <source>MINI</source>
         <extracomment>320</extracomment>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="301"/>
+        <location filename="../ui/mainwindow.ui" line="381"/>
         <source>1K</source>
         <extracomment>1024</extracomment>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="311"/>
+        <location filename="../ui/mainwindow.ui" line="397"/>
         <source>2K</source>
         <extracomment>2048</extracomment>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="318"/>
+        <location filename="../ui/mainwindow.ui" line="410"/>
         <source>4K</source>
         <extracomment>4096</extracomment>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="328"/>
+        <location filename="../ui/mainwindow.ui" line="420"/>
         <source>File</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="349"/>
+        <location filename="../ui/mainwindow.ui" line="441"/>
-        <location filename="../ui/mainwindow.ui" line="952"/>
+        <location filename="../ui/mainwindow.ui" line="1134"/>
         <source>Load</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="362"/>
+        <location filename="../ui/mainwindow.ui" line="454"/>
-        <location filename="../ui/mainwindow.ui" line="965"/>
+        <location filename="../ui/mainwindow.ui" line="1147"/>
         <source>Save</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="382"/>
+        <location filename="../ui/mainwindow.ui" line="474"/>
-        <location filename="../ui/mainwindow.cpp" line="751"/>
+        <location filename="../ui/mainwindow.cpp" line="814"/>
         <source>Data</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="392"/>
+        <location filename="../ui/mainwindow.ui" line="484"/>
         <source>Key</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="402"/>
+        <location filename="../ui/mainwindow.ui" line="494"/>
         <source>Attack</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="430"/>
+        <location filename="../ui/mainwindow.ui" line="528"/>
         <source>Card Info</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="443"/>
+        <location filename="../ui/mainwindow.ui" line="541"/>
         <source>Check Default</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="456"/>
+        <location filename="../ui/mainwindow.ui" line="554"/>
         <source>Nested</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="463"/>
+        <location filename="../ui/mainwindow.ui" line="567"/>
         <source>Hardnested</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="488"/>
+        <location filename="../ui/mainwindow.ui" line="592"/>
         <source>Read/Write</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="501"/>
+        <location filename="../ui/mainwindow.ui" line="605"/>
         <source>Block:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="533"/>
+        <location filename="../ui/mainwindow.ui" line="637"/>
         <source>Key:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="552"/>
+        <location filename="../ui/mainwindow.ui" line="656"/>
         <source>Key Type:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="926"/>
+        <location filename="../ui/mainwindow.ui" line="1108"/>
         <source>Snoop</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="939"/>
+        <location filename="../ui/mainwindow.ui" line="1121"/>
         <source>List Data</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="575"/>
+        <location filename="../ui/mainwindow.ui" line="679"/>
         <source>Data:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="597"/>
+        <location filename="../ui/mainwindow.ui" line="701"/>
         <source>Normal(Require Password)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="830"/>
+        <location filename="../ui/mainwindow.ui" line="783"/>
-        <source>Read All</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../ui/mainwindow.ui" line="655"/>
         <source>Dump</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="668"/>
+        <location filename="../ui/mainwindow.ui" line="802"/>
         <source>Restore</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="678"/>
+        <location filename="../ui/mainwindow.ui" line="812"/>
         <source>Chinese Magic Card(Without Password)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="693"/>
+        <location filename="../ui/mainwindow.ui" line="833"/>
         <source>Lock UFUID Card</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="700"/>
+        <location filename="../ui/mainwindow.ui" line="846"/>
-        <location filename="../ui/mainwindow.cpp" line="592"/>
+        <location filename="../ui/mainwindow.cpp" line="651"/>
         <source>About UID Card</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="741"/>
+        <location filename="../ui/mainwindow.ui" line="917"/>
         <source>Set Parameter</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="760"/>
+        <location filename="../ui/mainwindow.ui" line="936"/>
         <source>Wipe</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="786"/>
+        <location filename="../ui/mainwindow.ui" line="962"/>
-        <location filename="../ui/mainwindow.ui" line="856"/>
+        <location filename="../ui/mainwindow.ui" line="1038"/>
         <source>Simulate</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="817"/>
+        <location filename="../ui/mainwindow.ui" line="467"/>
-        <source>Load from data above</source>
+        <location filename="../ui/mainwindow.ui" line="1025"/>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../ui/mainwindow.ui" line="375"/>
-        <location filename="../ui/mainwindow.ui" line="843"/>
         <source>Clear</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="184"/>
+        <location filename="../ui/mainwindow.ui" line="202"/>
         <source>Select All</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="194"/>
+        <location filename="../ui/mainwindow.ui" line="238"/>
         <source>KeyBlocks-&gt;Key</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="201"/>
+        <location filename="../ui/mainwindow.ui" line="251"/>
         <source>KeyBlocks&lt;-Key</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="208"/>
+        <location filename="../ui/mainwindow.ui" line="264"/>
         <source>Fill Keys</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="215"/>
+        <location filename="../ui/mainwindow.ui" line="277"/>
         <source>Trailer Decoder</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="222"/>
+        <location filename="../ui/mainwindow.ui" line="290"/>
         <source>Set Fonts</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="615"/>
+        <location filename="../ui/mainwindow.ui" line="725"/>
-        <location filename="../ui/mainwindow.ui" line="707"/>
+        <location filename="../ui/mainwindow.ui" line="859"/>
         <source>Read One</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="622"/>
+        <location filename="../ui/mainwindow.ui" line="738"/>
-        <location filename="../ui/mainwindow.ui" line="714"/>
+        <location filename="../ui/mainwindow.ui" line="872"/>
         <source>Write One</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="629"/>
+        <location filename="../ui/mainwindow.ui" line="751"/>
-        <location filename="../ui/mainwindow.ui" line="721"/>
+        <location filename="../ui/mainwindow.ui" line="885"/>
+        <location filename="../ui/mainwindow.ui" line="1012"/>
         <source>Read Selected</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="636"/>
+        <location filename="../ui/mainwindow.ui" line="764"/>
-        <location filename="../ui/mainwindow.ui" line="728"/>
+        <location filename="../ui/mainwindow.ui" line="898"/>
+        <location filename="../ui/mainwindow.ui" line="999"/>
         <source>Write Selected</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="879"/>
+        <location filename="../ui/mainwindow.ui" line="1061"/>
-        <location filename="../ui/mainwindow.ui" line="913"/>
+        <location filename="../ui/mainwindow.ui" line="1095"/>
         <source>Sniff</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="991"/>
+        <location filename="../ui/mainwindow.ui" line="1173"/>
         <source>RawCommand</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1038"/>
+        <location filename="../ui/mainwindow.ui" line="1220"/>
-        <location filename="../ui/mainwindow.cpp" line="145"/>
+        <location filename="../ui/mainwindow.cpp" line="149"/>
         <source>History:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1070"/>
+        <location filename="../ui/mainwindow.ui" line="1252"/>
         <source>ClearHistory</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1089"/>
+        <location filename="../ui/mainwindow.ui" line="1271"/>
         <source>Send</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1096"/>
+        <location filename="../ui/mainwindow.ui" line="1278"/>
         <source>ClearOutput</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="77"/>
+        <location filename="../ui/mainwindow.cpp" line="81"/>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
-        <location filename="../ui/mainwindow.cpp" line="346"/>
+        <location filename="../ui/mainwindow.cpp" line="414"/>
-        <location filename="../ui/mainwindow.cpp" line="365"/>
+        <location filename="../ui/mainwindow.cpp" line="434"/>
-        <location filename="../ui/mainwindow.cpp" line="378"/>
+        <location filename="../ui/mainwindow.cpp" line="447"/>
-        <location filename="../ui/mainwindow.cpp" line="397"/>
+        <location filename="../ui/mainwindow.cpp" line="466"/>
-        <location filename="../ui/mainwindow.cpp" line="410"/>
+        <location filename="../ui/mainwindow.cpp" line="479"/>
-        <location filename="../ui/mainwindow.cpp" line="433"/>
+        <location filename="../ui/mainwindow.cpp" line="502"/>
-        <location filename="../ui/mainwindow.cpp" line="446"/>
+        <location filename="../ui/mainwindow.cpp" line="515"/>
-        <location filename="../ui/mainwindow.cpp" line="649"/>
+        <location filename="../ui/mainwindow.cpp" line="709"/>
-        <location filename="../ui/mainwindow.cpp" line="668"/>
+        <location filename="../ui/mainwindow.cpp" line="728"/>
         <source>Info</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="77"/>
+        <location filename="../ui/mainwindow.cpp" line="81"/>
         <source>Plz choose a port first</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="92"/>
+        <location filename="../ui/mainwindow.cpp" line="96"/>
         <source>Connected</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="97"/>
+        <location filename="../ui/mainwindow.cpp" line="101"/>
-        <location filename="../ui/mainwindow.cpp" line="107"/>
+        <location filename="../ui/mainwindow.cpp" line="111"/>
-        <location filename="../ui/mainwindow.cpp" line="741"/>
+        <location filename="../ui/mainwindow.cpp" line="804"/>
         <source>Not Connected</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="391"/>
+        <location filename="../ui/mainwindow.cpp" line="460"/>
         <source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml);;All Files(*.*)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="397"/>
+        <location filename="../ui/mainwindow.cpp" line="466"/>
-        <location filename="../ui/mainwindow.cpp" line="410"/>
+        <location filename="../ui/mainwindow.cpp" line="479"/>
-        <location filename="../ui/mainwindow.cpp" line="649"/>
+        <location filename="../ui/mainwindow.cpp" line="709"/>
         <source>Failed to open</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
         <source>Continue?</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="10"/>
+        <source>Check Update</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
         <source>Some of the data and key will be cleared.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="252"/>
+        <location filename="../ui/mainwindow.cpp" line="301"/>
         <source>Plz select the font of data widget and key widget</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="346"/>
+        <location filename="../ui/mainwindow.cpp" line="414"/>
         <source>Data must consists of 32 Hex symbols(Whitespace is allowed)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="365"/>
+        <location filename="../ui/mainwindow.cpp" line="434"/>
-        <location filename="../ui/mainwindow.cpp" line="378"/>
+        <location filename="../ui/mainwindow.cpp" line="447"/>
         <source>Key must consists of 12 Hex symbols(Whitespace is allowed)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="390"/>
+        <location filename="../ui/mainwindow.cpp" line="459"/>
         <source>Plz select the data file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="403"/>
+        <location filename="../ui/mainwindow.cpp" line="472"/>
         <source>Plz select the key file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="404"/>
+        <location filename="../ui/mainwindow.cpp" line="473"/>
         <source>Binary Key Files(*.bin *.dump);;Binary Data Files(*.bin *.dump);;All Files(*.*)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="426"/>
+        <location filename="../ui/mainwindow.cpp" line="495"/>
         <source>Plz select the location to save data file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="427"/>
+        <location filename="../ui/mainwindow.cpp" line="496"/>
         <source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="433"/>
+        <location filename="../ui/mainwindow.cpp" line="502"/>
-        <location filename="../ui/mainwindow.cpp" line="446"/>
+        <location filename="../ui/mainwindow.cpp" line="515"/>
-        <location filename="../ui/mainwindow.cpp" line="668"/>
+        <location filename="../ui/mainwindow.cpp" line="728"/>
         <source>Failed to save to</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="439"/>
+        <location filename="../ui/mainwindow.cpp" line="508"/>
         <source>Plz select the location to save key file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="440"/>
+        <location filename="../ui/mainwindow.cpp" line="509"/>
         <source>Binary Key Files(*.bin *.dump)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="577"/>
+        <location filename="../ui/mainwindow.cpp" line="636"/>
         <source>    Normally, the Block 0 of a typical Mifare card, which contains the UID, is locked during the manufacture. Users cannot write anything to Block 0 or set a new UID to a normal Mifare card.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="578"/>
+        <location filename="../ui/mainwindow.cpp" line="637"/>
         <source>    Chinese Magic Cards(aka UID Cards) are some special cards whose Block 0 are writeable. And you can change UID by writing to it.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="580"/>
+        <location filename="../ui/mainwindow.cpp" line="639"/>
         <source>There are two versions of Chinese Magic Cards, the Gen1 and the Gen2.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="581"/>
+        <location filename="../ui/mainwindow.cpp" line="640"/>
         <source>    Gen1:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="581"/>
+        <location filename="../ui/mainwindow.cpp" line="640"/>
         <source>    also called UID card in China. It responses to some backdoor commands so you can access any blocks without password. The Proxmark3 has a bunch of related commands(csetblk, cgetblk, ...) to deal with this type of card, and my GUI also support these commands.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="582"/>
+        <location filename="../ui/mainwindow.cpp" line="641"/>
         <source>    Gen2:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="582"/>
+        <location filename="../ui/mainwindow.cpp" line="641"/>
         <source>    doesn&apos;t response to the backdoor commands, which means that a reader cannot detect whether it is a Chinese Magic Card or not by sending backdoor commands.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="584"/>
+        <location filename="../ui/mainwindow.cpp" line="643"/>
         <source>There are some types of Chinese Magic Card Gen2.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="585"/>
+        <location filename="../ui/mainwindow.cpp" line="644"/>
         <source>    CUID Card:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="585"/>
+        <location filename="../ui/mainwindow.cpp" line="644"/>
         <source>    the Block 0 is writeable, you can write to this block repeatedly by normal wrbl command.</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="586"/>
+        <location filename="../ui/mainwindow.cpp" line="645"/>
         <source>    (hf mf wrbl 0 A FFFFFFFFFFFF &lt;the data you want to write&gt;)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="587"/>
+        <location filename="../ui/mainwindow.cpp" line="646"/>
         <source>    FUID Card:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="587"/>
+        <location filename="../ui/mainwindow.cpp" line="646"/>
         <source>    you can only write to Block 0 once. After that, it seems like a typical Mifare card(Block 0 cannot be written to).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="588"/>
+        <location filename="../ui/mainwindow.cpp" line="647"/>
         <source>    (some readers might try changing the Block 0, which could detect the CUID Card. In that case, you should use FUID card.)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="589"/>
+        <location filename="../ui/mainwindow.cpp" line="648"/>
         <source>    UFUID Card:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="589"/>
+        <location filename="../ui/mainwindow.cpp" line="648"/>
         <source>    It behaves like a CUID card(or UID card? I&apos;m not sure) before you send some special command to lock it. Once it is locked, you cannot change its Block 0(just like a typical Mifare card).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="591"/>
+        <location filename="../ui/mainwindow.cpp" line="650"/>
         <source>    Seemingly, these Chinese Magic Cards are more easily to be compromised by Nested Attack(it takes little time to get an unknown key).</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="636"/>
+        <location filename="../ui/mainwindow.cpp" line="696"/>
         <source>Plz select the trace file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="637"/>
+        <location filename="../ui/mainwindow.cpp" line="697"/>
         <source>Trace Files(*.trc);;All Files(*.*)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="659"/>
+        <location filename="../ui/mainwindow.cpp" line="719"/>
         <source>Plz select the location to save trace file:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="660"/>
+        <location filename="../ui/mainwindow.cpp" line="720"/>
         <source>Trace Files(*.trc)</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="742"/>
+        <location filename="../ui/mainwindow.cpp" line="805"/>
-        <location filename="../ui/mainwindow.cpp" line="897"/>
+        <location filename="../ui/mainwindow.cpp" line="960"/>
         <source>Idle</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="749"/>
+        <location filename="../ui/mainwindow.cpp" line="812"/>
-        <location filename="../ui/mainwindow.cpp" line="758"/>
+        <location filename="../ui/mainwindow.cpp" line="821"/>
         <source>Sec</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="750"/>
+        <location filename="../ui/mainwindow.cpp" line="813"/>
         <source>Blk</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="759"/>
+        <location filename="../ui/mainwindow.cpp" line="822"/>
         <source>KeyA</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="760"/>
+        <location filename="../ui/mainwindow.cpp" line="823"/>
         <source>KeyB</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="834"/>
+        <location filename="../ui/mainwindow.cpp" line="897"/>
         <source>HW Version:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="836"/>
+        <location filename="../ui/mainwindow.cpp" line="899"/>
         <source>PM3:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="838"/>
+        <location filename="../ui/mainwindow.cpp" line="901"/>
         <source>State:</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="893"/>
+        <location filename="../ui/mainwindow.cpp" line="956"/>
         <source>Running</source>
         <translation type="unfinished"></translation>
     </message>
@@ -843,18 +845,15 @@ It could make the whole sector blocked irreversibly!</source>
 <context>
     <name>Mifare</name>
     <message>
-        <location filename="../module/mifare.cpp" line="524"/>
+        <location filename="../module/mifare.cpp" line="592"/>
-        <location filename="../module/mifare.cpp" line="611"/>
         <source>Success!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
         <location filename="../module/mifare.cpp" line="219"/>
-        <location filename="../module/mifare.cpp" line="524"/>
+        <location filename="../module/mifare.cpp" line="592"/>
-        <location filename="../module/mifare.cpp" line="528"/>
+        <location filename="../module/mifare.cpp" line="596"/>
-        <location filename="../module/mifare.cpp" line="611"/>
+        <location filename="../module/mifare.cpp" line="661"/>
-        <location filename="../module/mifare.cpp" line="615"/>
-        <location filename="../module/mifare.cpp" line="665"/>
         <source>Info</source>
         <translation type="unfinished"></translation>
     </message>
@@ -864,14 +863,13 @@ It could make the whole sector blocked irreversibly!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../module/mifare.cpp" line="411"/>
+        <location filename="../module/mifare.cpp" line="443"/>
-        <location filename="../module/mifare.cpp" line="528"/>
+        <location filename="../module/mifare.cpp" line="596"/>
-        <location filename="../module/mifare.cpp" line="615"/>
         <source>Failed!</source>
         <translation type="unfinished"></translation>
     </message>
     <message>
-        <location filename="../module/mifare.cpp" line="665"/>
+        <location filename="../module/mifare.cpp" line="661"/>
         <source>Failed to read card.</source>
         <translation type="unfinished"></translation>
     </message>

lang/zh_CN.ts

@@ -294,552 +294,554 @@ It could make the whole sector blocked irreversibly!</source>
         <translation>路径：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="76"/>
+        <location filename="../ui/mainwindow.ui" line="82"/>
         <source>Refresh</source>
         <translation>刷新端口</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="83"/>
+        <location filename="../ui/mainwindow.ui" line="95"/>
         <source>Connect</source>
         <translation>连接</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="90"/>
+        <location filename="../ui/mainwindow.ui" line="108"/>
         <source>Disconnect</source>
         <translation>断开</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="109"/>
+        <location filename="../ui/mainwindow.ui" line="127"/>
         <source>Mifare</source>
         <translation>Mifare(IC)卡</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="279"/>
+        <location filename="../ui/mainwindow.ui" line="209"/>
+        <source>Select Trailer</source>
+        <translation>选中密码块</translation>
+    </message>
+    <message>
+        <location filename="../ui/mainwindow.ui" line="347"/>
         <source>Card Type</source>
         <translation>卡类型</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="294"/>
+        <location filename="../ui/mainwindow.ui" line="368"/>
         <source>MINI</source>
         <extracomment>320</extracomment>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="301"/>
+        <location filename="../ui/mainwindow.ui" line="381"/>
         <source>1K</source>
         <extracomment>1024</extracomment>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="311"/>
+        <location filename="../ui/mainwindow.ui" line="397"/>
         <source>2K</source>
         <extracomment>2048</extracomment>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="318"/>
+        <location filename="../ui/mainwindow.ui" line="410"/>
         <source>4K</source>
         <extracomment>4096</extracomment>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="328"/>
+        <location filename="../ui/mainwindow.ui" line="420"/>
         <source>File</source>
         <translation>文件</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="349"/>
+        <location filename="../ui/mainwindow.ui" line="441"/>
-        <location filename="../ui/mainwindow.ui" line="952"/>
+        <location filename="../ui/mainwindow.ui" line="1134"/>
         <source>Load</source>
         <translation>加载</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="362"/>
+        <location filename="../ui/mainwindow.ui" line="454"/>
-        <location filename="../ui/mainwindow.ui" line="965"/>
+        <location filename="../ui/mainwindow.ui" line="1147"/>
         <source>Save</source>
         <translation>保存</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="382"/>
+        <location filename="../ui/mainwindow.ui" line="474"/>
-        <location filename="../ui/mainwindow.cpp" line="751"/>
+        <location filename="../ui/mainwindow.cpp" line="814"/>
         <source>Data</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="392"/>
+        <location filename="../ui/mainwindow.ui" line="484"/>
         <source>Key</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="402"/>
+        <location filename="../ui/mainwindow.ui" line="494"/>
         <source>Attack</source>
         <translation>破解</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="430"/>
+        <location filename="../ui/mainwindow.ui" line="528"/>
         <source>Card Info</source>
         <translation>读卡片信息</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="443"/>
+        <location filename="../ui/mainwindow.ui" line="541"/>
         <source>Check Default</source>
         <translation>验证默认密码</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="456"/>
+        <location filename="../ui/mainwindow.ui" line="554"/>
         <source>Nested</source>
         <translation>Nested攻击</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="463"/>
+        <location filename="../ui/mainwindow.ui" line="567"/>
         <source>Hardnested</source>
         <translation>Hardested攻击</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="488"/>
+        <location filename="../ui/mainwindow.ui" line="592"/>
         <source>Read/Write</source>
         <translation>读/写</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="501"/>
+        <location filename="../ui/mainwindow.ui" line="605"/>
         <source>Block:</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="533"/>
+        <location filename="../ui/mainwindow.ui" line="637"/>
         <source>Key:</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="552"/>
+        <location filename="../ui/mainwindow.ui" line="656"/>
         <source>Key Type:</source>
         <translation>Key类型：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="926"/>
+        <location filename="../ui/mainwindow.ui" line="1108"/>
         <source>Snoop</source>
         <translation>嗅探(Snoop)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="939"/>
+        <location filename="../ui/mainwindow.ui" line="1121"/>
         <source>List Data</source>
         <translation>列出嗅探数据</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="575"/>
+        <location filename="../ui/mainwindow.ui" line="679"/>
         <source>Data:</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="597"/>
+        <location filename="../ui/mainwindow.ui" line="701"/>
         <source>Normal(Require Password)</source>
         <translation>普通卡（需要密码）</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="830"/>
+        <location filename="../ui/mainwindow.ui" line="783"/>
-        <source>Read All</source>
-        <translation>读所有块</translation>
-    </message>
-    <message>
-        <location filename="../ui/mainwindow.ui" line="655"/>
         <source>Dump</source>
         <translation>Dump命令</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="668"/>
+        <location filename="../ui/mainwindow.ui" line="802"/>
         <source>Restore</source>
         <translation>Restore命令</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="678"/>
+        <location filename="../ui/mainwindow.ui" line="812"/>
         <source>Chinese Magic Card(Without Password)</source>
         <translation>UID卡（不需要密码）</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="693"/>
+        <location filename="../ui/mainwindow.ui" line="833"/>
         <source>Lock UFUID Card</source>
         <translation>锁定UFUID卡</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="700"/>
+        <location filename="../ui/mainwindow.ui" line="846"/>
-        <location filename="../ui/mainwindow.cpp" line="592"/>
+        <location filename="../ui/mainwindow.cpp" line="651"/>
         <source>About UID Card</source>
         <translation>关于UID卡</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="741"/>
+        <location filename="../ui/mainwindow.ui" line="917"/>
         <source>Set Parameter</source>
         <translation>设置卡参数</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="760"/>
+        <location filename="../ui/mainwindow.ui" line="936"/>
         <source>Wipe</source>
         <translation>擦除</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="786"/>
+        <location filename="../ui/mainwindow.ui" line="962"/>
-        <location filename="../ui/mainwindow.ui" line="856"/>
+        <location filename="../ui/mainwindow.ui" line="1038"/>
         <source>Simulate</source>
         <translation>模拟</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="817"/>
+        <location filename="../ui/mainwindow.ui" line="467"/>
-        <source>Load from data above</source>
+        <location filename="../ui/mainwindow.ui" line="1025"/>
-        <translation>从上方数据导入</translation>
-    </message>
-    <message>
-        <location filename="../ui/mainwindow.ui" line="375"/>
-        <location filename="../ui/mainwindow.ui" line="843"/>
         <source>Clear</source>
         <translation>清空</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="184"/>
+        <location filename="../ui/mainwindow.ui" line="202"/>
         <source>Select All</source>
         <translation>全选</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="194"/>
+        <location filename="../ui/mainwindow.ui" line="238"/>
         <source>KeyBlocks-&gt;Key</source>
         <translation>密码区-&gt;密码</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="201"/>
+        <location filename="../ui/mainwindow.ui" line="251"/>
         <source>KeyBlocks&lt;-Key</source>
         <translation>密码区&lt;-密码</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="208"/>
+        <location filename="../ui/mainwindow.ui" line="264"/>
         <source>Fill Keys</source>
         <translation>填充密码</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="215"/>
+        <location filename="../ui/mainwindow.ui" line="277"/>
         <source>Trailer Decoder</source>
         <translation>Trailer解码</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="222"/>
+        <location filename="../ui/mainwindow.ui" line="290"/>
         <source>Set Fonts</source>
         <translation>设置字体</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="615"/>
+        <location filename="../ui/mainwindow.ui" line="725"/>
-        <location filename="../ui/mainwindow.ui" line="707"/>
+        <location filename="../ui/mainwindow.ui" line="859"/>
         <source>Read One</source>
         <translation>读取单个区</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="622"/>
+        <location filename="../ui/mainwindow.ui" line="738"/>
-        <location filename="../ui/mainwindow.ui" line="714"/>
+        <location filename="../ui/mainwindow.ui" line="872"/>
         <source>Write One</source>
         <translation>写入单个区</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="629"/>
+        <location filename="../ui/mainwindow.ui" line="751"/>
-        <location filename="../ui/mainwindow.ui" line="721"/>
+        <location filename="../ui/mainwindow.ui" line="885"/>
+        <location filename="../ui/mainwindow.ui" line="1012"/>
         <source>Read Selected</source>
         <translation>读取选中块</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="636"/>
+        <location filename="../ui/mainwindow.ui" line="764"/>
-        <location filename="../ui/mainwindow.ui" line="728"/>
+        <location filename="../ui/mainwindow.ui" line="898"/>
+        <location filename="../ui/mainwindow.ui" line="999"/>
         <source>Write Selected</source>
         <translation>写入选中块</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="879"/>
+        <location filename="../ui/mainwindow.ui" line="1061"/>
-        <location filename="../ui/mainwindow.ui" line="913"/>
+        <location filename="../ui/mainwindow.ui" line="1095"/>
         <source>Sniff</source>
         <translation>嗅探</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="991"/>
+        <location filename="../ui/mainwindow.ui" line="1173"/>
         <source>RawCommand</source>
         <translation>原始命令</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1038"/>
+        <location filename="../ui/mainwindow.ui" line="1220"/>
-        <location filename="../ui/mainwindow.cpp" line="145"/>
+        <location filename="../ui/mainwindow.cpp" line="149"/>
         <source>History:</source>
         <translation>命令历史：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1070"/>
+        <location filename="../ui/mainwindow.ui" line="1252"/>
         <source>ClearHistory</source>
         <translation>清空历史</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1089"/>
+        <location filename="../ui/mainwindow.ui" line="1271"/>
         <source>Send</source>
         <translation>发送</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.ui" line="1096"/>
+        <location filename="../ui/mainwindow.ui" line="1278"/>
         <source>ClearOutput</source>
         <translation>清空输出</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="77"/>
+        <location filename="../ui/mainwindow.cpp" line="81"/>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
-        <location filename="../ui/mainwindow.cpp" line="346"/>
+        <location filename="../ui/mainwindow.cpp" line="414"/>
-        <location filename="../ui/mainwindow.cpp" line="365"/>
+        <location filename="../ui/mainwindow.cpp" line="434"/>
-        <location filename="../ui/mainwindow.cpp" line="378"/>
+        <location filename="../ui/mainwindow.cpp" line="447"/>
-        <location filename="../ui/mainwindow.cpp" line="397"/>
+        <location filename="../ui/mainwindow.cpp" line="466"/>
-        <location filename="../ui/mainwindow.cpp" line="410"/>
+        <location filename="../ui/mainwindow.cpp" line="479"/>
-        <location filename="../ui/mainwindow.cpp" line="433"/>
+        <location filename="../ui/mainwindow.cpp" line="502"/>
-        <location filename="../ui/mainwindow.cpp" line="446"/>
+        <location filename="../ui/mainwindow.cpp" line="515"/>
-        <location filename="../ui/mainwindow.cpp" line="649"/>
+        <location filename="../ui/mainwindow.cpp" line="709"/>
-        <location filename="../ui/mainwindow.cpp" line="668"/>
+        <location filename="../ui/mainwindow.cpp" line="728"/>
         <source>Info</source>
         <translation>信息</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="77"/>
+        <location filename="../ui/mainwindow.cpp" line="81"/>
         <source>Plz choose a port first</source>
         <translation>请先选择端口</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="92"/>
+        <location filename="../ui/mainwindow.cpp" line="96"/>
         <source>Connected</source>
         <translation>已连接</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="97"/>
+        <location filename="../ui/mainwindow.cpp" line="101"/>
-        <location filename="../ui/mainwindow.cpp" line="107"/>
+        <location filename="../ui/mainwindow.cpp" line="111"/>
-        <location filename="../ui/mainwindow.cpp" line="741"/>
+        <location filename="../ui/mainwindow.cpp" line="804"/>
         <source>Not Connected</source>
         <translation>未连接</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="391"/>
+        <location filename="../ui/mainwindow.cpp" line="460"/>
         <source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml);;All Files(*.*)</source>
         <translation>二进制Data文件(*.bin *.dump);;文本Data文件(*.txt *.eml);;所有文件(*.*)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="397"/>
+        <location filename="../ui/mainwindow.cpp" line="466"/>
-        <location filename="../ui/mainwindow.cpp" line="410"/>
+        <location filename="../ui/mainwindow.cpp" line="479"/>
-        <location filename="../ui/mainwindow.cpp" line="649"/>
+        <location filename="../ui/mainwindow.cpp" line="709"/>
         <source>Failed to open</source>
         <translation>无法打开</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
         <source>Continue?</source>
         <translation>确定？</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="184"/>
+        <location filename="../ui/mainwindow.cpp" line="10"/>
+        <source>Check Update</source>
+        <translation>检查更新</translation>
+    </message>
+    <message>
+        <location filename="../ui/mainwindow.cpp" line="188"/>
         <source>Some of the data and key will be cleared.</source>
         <translation>部分数据和密码将被清除</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="252"/>
+        <location filename="../ui/mainwindow.cpp" line="301"/>
         <source>Plz select the font of data widget and key widget</source>
         <translation>请选择Data窗口和Key窗口的字体</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="346"/>
+        <location filename="../ui/mainwindow.cpp" line="414"/>
         <source>Data must consists of 32 Hex symbols(Whitespace is allowed)</source>
         <translation>Data必须由32个十六进制字符组成（中间可含有空格）</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="365"/>
+        <location filename="../ui/mainwindow.cpp" line="434"/>
-        <location filename="../ui/mainwindow.cpp" line="378"/>
+        <location filename="../ui/mainwindow.cpp" line="447"/>
         <source>Key must consists of 12 Hex symbols(Whitespace is allowed)</source>
         <translation>Key必须由12个十六进制字符组成（中间可含有空格）</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="390"/>
+        <location filename="../ui/mainwindow.cpp" line="459"/>
         <source>Plz select the data file:</source>
         <translation>请选择data文件：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="403"/>
+        <location filename="../ui/mainwindow.cpp" line="472"/>
         <source>Plz select the key file:</source>
         <translation>请选择key文件：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="404"/>
+        <location filename="../ui/mainwindow.cpp" line="473"/>
         <source>Binary Key Files(*.bin *.dump);;Binary Data Files(*.bin *.dump);;All Files(*.*)</source>
         <translation>二进制Key文件(*.bin *.dump)二进制Data文件(*.bin *.dump);;所有文件(*.*)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="426"/>
+        <location filename="../ui/mainwindow.cpp" line="495"/>
         <source>Plz select the location to save data file:</source>
         <translation>请选择文件保存的位置：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="427"/>
+        <location filename="../ui/mainwindow.cpp" line="496"/>
         <source>Binary Data Files(*.bin *.dump);;Text Data Files(*.txt *.eml)</source>
         <translation>二进制Data文件(*.bin *.dump);;文本Data文件(*.txt *.eml)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="433"/>
+        <location filename="../ui/mainwindow.cpp" line="502"/>
-        <location filename="../ui/mainwindow.cpp" line="446"/>
+        <location filename="../ui/mainwindow.cpp" line="515"/>
-        <location filename="../ui/mainwindow.cpp" line="668"/>
+        <location filename="../ui/mainwindow.cpp" line="728"/>
         <source>Failed to save to</source>
         <translation>无法保存至</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="439"/>
+        <location filename="../ui/mainwindow.cpp" line="508"/>
         <source>Plz select the location to save key file:</source>
         <translation>请选择key文件保存的位置：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="440"/>
+        <location filename="../ui/mainwindow.cpp" line="509"/>
         <source>Binary Key Files(*.bin *.dump)</source>
         <translation>二进制Key文件(*.bin *.dump)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="577"/>
+        <location filename="../ui/mainwindow.cpp" line="636"/>
         <source>    Normally, the Block 0 of a typical Mifare card, which contains the UID, is locked during the manufacture. Users cannot write anything to Block 0 or set a new UID to a normal Mifare card.</source>
         <translation>    普通Mifare卡的Block0无法写入，UID也不能更改</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="578"/>
+        <location filename="../ui/mainwindow.cpp" line="637"/>
         <source>    Chinese Magic Cards(aka UID Cards) are some special cards whose Block 0 are writeable. And you can change UID by writing to it.</source>
         <translation>    UID卡（在国外叫Chinese Magic Card）的Block0可写，UID可变</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="580"/>
+        <location filename="../ui/mainwindow.cpp" line="639"/>
         <source>There are two versions of Chinese Magic Cards, the Gen1 and the Gen2.</source>
         <translation>国外把UID卡分为Chinese Magic Card Gen1和Gen2</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="581"/>
+        <location filename="../ui/mainwindow.cpp" line="640"/>
         <source>    Gen1:</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="581"/>
+        <location filename="../ui/mainwindow.cpp" line="640"/>
         <source>    also called UID card in China. It responses to some backdoor commands so you can access any blocks without password. The Proxmark3 has a bunch of related commands(csetblk, cgetblk, ...) to deal with this type of card, and my GUI also support these commands.</source>
         <translation>    指通常所说的UID卡，可以通过后门指令直接读写块而无需密码，在PM3和此GUI中有特殊命令处理这类卡片</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="582"/>
+        <location filename="../ui/mainwindow.cpp" line="641"/>
         <source>    Gen2:</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="582"/>
+        <location filename="../ui/mainwindow.cpp" line="641"/>
         <source>    doesn&apos;t response to the backdoor commands, which means that a reader cannot detect whether it is a Chinese Magic Card or not by sending backdoor commands.</source>
         <translation>    这个叫法在国内比较罕见，在国外指CUID/FUID/UFUID这类对后门指令不响应的卡（防火墙卡）</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="584"/>
+        <location filename="../ui/mainwindow.cpp" line="643"/>
         <source>There are some types of Chinese Magic Card Gen2.</source>
         <translation>以下是Gen2卡的详细介绍</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="585"/>
+        <location filename="../ui/mainwindow.cpp" line="644"/>
         <source>    CUID Card:</source>
         <translation>    CUID卡：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="585"/>
+        <location filename="../ui/mainwindow.cpp" line="644"/>
         <source>    the Block 0 is writeable, you can write to this block repeatedly by normal wrbl command.</source>
         <translation>    可通过普通的写块命令来写Block0，可重复擦写</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="586"/>
+        <location filename="../ui/mainwindow.cpp" line="645"/>
         <source>    (hf mf wrbl 0 A FFFFFFFFFFFF &lt;the data you want to write&gt;)</source>
         <translation>    (hf mf wrbl 0 A FFFFFFFFFFFF &lt;待写入数据&gt;)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="587"/>
+        <location filename="../ui/mainwindow.cpp" line="646"/>
         <source>    FUID Card:</source>
         <translation>    FUID卡：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="587"/>
+        <location filename="../ui/mainwindow.cpp" line="646"/>
         <source>    you can only write to Block 0 once. After that, it seems like a typical Mifare card(Block 0 cannot be written to).</source>
         <translation>    Block0只能写入一次</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="588"/>
+        <location filename="../ui/mainwindow.cpp" line="647"/>
         <source>    (some readers might try changing the Block 0, which could detect the CUID Card. In that case, you should use FUID card.)</source>
         <translation>    (更高级的穿防火墙卡，可以过一些能识别出CUID卡的读卡器)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="589"/>
+        <location filename="../ui/mainwindow.cpp" line="648"/>
         <source>    UFUID Card:</source>
         <translation>    UFUID卡：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="589"/>
+        <location filename="../ui/mainwindow.cpp" line="648"/>
         <source>    It behaves like a CUID card(or UID card? I&apos;m not sure) before you send some special command to lock it. Once it is locked, you cannot change its Block 0(just like a typical Mifare card).</source>
         <translation>    锁卡前和普通UID/CUID卡一样可以反复读写Block0，用特殊命令锁卡后就和FUID卡一样了</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="591"/>
+        <location filename="../ui/mainwindow.cpp" line="650"/>
         <source>    Seemingly, these Chinese Magic Cards are more easily to be compromised by Nested Attack(it takes little time to get an unknown key).</source>
         <translation>    所有UID卡都似乎更容易被Nested攻击破解</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="636"/>
+        <location filename="../ui/mainwindow.cpp" line="696"/>
         <source>Plz select the trace file:</source>
         <translation>请选择trace文件：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="637"/>
+        <location filename="../ui/mainwindow.cpp" line="697"/>
         <source>Trace Files(*.trc);;All Files(*.*)</source>
         <translation>Trace文件(*.trc);;所有文件(*.*)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="659"/>
+        <location filename="../ui/mainwindow.cpp" line="719"/>
         <source>Plz select the location to save trace file:</source>
         <translation>请选择trace文件保存的位置：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="660"/>
+        <location filename="../ui/mainwindow.cpp" line="720"/>
         <source>Trace Files(*.trc)</source>
         <translation>Trace文件(*.trc)</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="742"/>
+        <location filename="../ui/mainwindow.cpp" line="805"/>
-        <location filename="../ui/mainwindow.cpp" line="897"/>
+        <location filename="../ui/mainwindow.cpp" line="960"/>
         <source>Idle</source>
         <translation>空闲</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="749"/>
+        <location filename="../ui/mainwindow.cpp" line="812"/>
-        <location filename="../ui/mainwindow.cpp" line="758"/>
+        <location filename="../ui/mainwindow.cpp" line="821"/>
         <source>Sec</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="750"/>
+        <location filename="../ui/mainwindow.cpp" line="813"/>
         <source>Blk</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="759"/>
+        <location filename="../ui/mainwindow.cpp" line="822"/>
         <source>KeyA</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="760"/>
+        <location filename="../ui/mainwindow.cpp" line="823"/>
         <source>KeyB</source>
         <translation></translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="834"/>
+        <location filename="../ui/mainwindow.cpp" line="897"/>
         <source>HW Version:</source>
         <translation>固件版本：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="836"/>
+        <location filename="../ui/mainwindow.cpp" line="899"/>
         <source>PM3:</source>
         <translation>连接状态：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="838"/>
+        <location filename="../ui/mainwindow.cpp" line="901"/>
         <source>State:</source>
         <translation>运行状态：</translation>
     </message>
     <message>
-        <location filename="../ui/mainwindow.cpp" line="893"/>
+        <location filename="../ui/mainwindow.cpp" line="956"/>
         <source>Running</source>
         <translation>运行中</translation>
     </message>
@@ -847,18 +849,15 @@ It could make the whole sector blocked irreversibly!</source>
 <context>
     <name>Mifare</name>
     <message>
-        <location filename="../module/mifare.cpp" line="524"/>
+        <location filename="../module/mifare.cpp" line="592"/>
-        <location filename="../module/mifare.cpp" line="611"/>
         <source>Success!</source>
         <translation>成功！</translation>
     </message>
     <message>
         <location filename="../module/mifare.cpp" line="219"/>
-        <location filename="../module/mifare.cpp" line="524"/>
+        <location filename="../module/mifare.cpp" line="592"/>
-        <location filename="../module/mifare.cpp" line="528"/>
+        <location filename="../module/mifare.cpp" line="596"/>
-        <location filename="../module/mifare.cpp" line="611"/>
+        <location filename="../module/mifare.cpp" line="661"/>
-        <location filename="../module/mifare.cpp" line="615"/>
-        <location filename="../module/mifare.cpp" line="665"/>
         <source>Info</source>
         <translation>信息</translation>
     </message>
@@ -868,14 +867,13 @@ It could make the whole sector blocked irreversibly!</source>
         <translation>请至少提供一个已知密码</translation>
     </message>
     <message>
-        <location filename="../module/mifare.cpp" line="411"/>
+        <location filename="../module/mifare.cpp" line="443"/>
-        <location filename="../module/mifare.cpp" line="528"/>
+        <location filename="../module/mifare.cpp" line="596"/>
-        <location filename="../module/mifare.cpp" line="615"/>
         <source>Failed!</source>
         <translation>失败！</translation>
     </message>
     <message>
-        <location filename="../module/mifare.cpp" line="665"/>
+        <location filename="../module/mifare.cpp" line="661"/>
         <source>Failed to read card.</source>
         <translation>读卡失败。</translation>
     </message>

ui/mainwindow.cpp

@@ -7,11 +7,17 @@ MainWindow::MainWindow(QWidget *parent):
 {
     ui->setupUi(this);
     myInfo = new QAction("wh201906", this);
+    checkUpdate = new QAction(tr("Check Update"), this);
     connect(myInfo, &QAction::triggered, [ = ]()
     {
         QDesktopServices::openUrl(QUrl("https://github.com/wh201906"));
     });
+    connect(checkUpdate, &QAction::triggered, [ = ]()
+    {
+        QDesktopServices::openUrl(QUrl("https://github.com/wh201906/Proxmark3GUI/releases"));
+    });
     this->addAction(myInfo);
+    this->addAction(checkUpdate);
 
     settings = new QSettings("GUIsettings.ini", QSettings::IniFormat);
 
@@ -206,6 +212,7 @@ void MainWindow::on_MF_selectAllBox_stateChanged(int arg1)
 {
     ui->MF_dataWidget->blockSignals(true);
     ui->MF_selectAllBox->blockSignals(true);
+    ui->MF_selectTrailerBox->blockSignals(true);
     if(arg1 == Qt::PartiallyChecked)
     {
         ui->MF_selectAllBox->setTristate(false);
@@ -219,10 +226,54 @@ void MainWindow::on_MF_selectAllBox_stateChanged(int arg1)
     {
         ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(ui->MF_selectAllBox->checkState());
     }
+    ui->MF_selectTrailerBox->setCheckState(ui->MF_selectAllBox->checkState());
+    ui->MF_dataWidget->blockSignals(false);
+    ui->MF_selectAllBox->blockSignals(false);
+    ui->MF_selectTrailerBox->blockSignals(false);
+}
+
+
+void MainWindow::on_MF_selectTrailerBox_stateChanged(int arg1)
+{
+    int selectedSubBlocks = 0;
+
+    ui->MF_dataWidget->blockSignals(true);
+    ui->MF_selectAllBox->blockSignals(true);
+    ui->MF_selectTrailerBox->blockSignals(true);
+    if(arg1 == Qt::PartiallyChecked)
+    {
+        ui->MF_selectTrailerBox->setTristate(false);
+        ui->MF_selectTrailerBox->setCheckState(Qt::Checked);
+    }
+    for(int i = 0; i < mifare->cardType.sector_size; i++)
+    {
+        ui->MF_dataWidget->item(mifare->cardType.blks[i] + mifare->cardType.blk[i] - 1, 1)->setCheckState(ui->MF_selectTrailerBox->checkState());
+        selectedSubBlocks = 0;
+        for(int j = 0; j < mifare->cardType.blk[i]; j++)
+        {
+            if(ui->MF_dataWidget->item(j + mifare->cardType.blks[i], 1)->checkState() == Qt::Checked)
+                selectedSubBlocks++;
+        }
+        if(selectedSubBlocks == 0)
+        {
+            ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(Qt::Unchecked);
+        }
+        else if(selectedSubBlocks == mifare->cardType.blk[i])
+        {
+            ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(Qt::Checked);
+        }
+        else
+        {
+            ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(Qt::PartiallyChecked);
+        }
+    }
+
     ui->MF_dataWidget->blockSignals(false);
     ui->MF_selectAllBox->blockSignals(false);
+    ui->MF_selectTrailerBox->blockSignals(false);
 }
 
+
 void MainWindow::on_MF_data2KeyButton_clicked()
 {
     mifare->data_data2Key();
@@ -260,6 +311,7 @@ void MainWindow::on_MF_dataWidget_itemChanged(QTableWidgetItem *item)
 {
     ui->MF_dataWidget->blockSignals(true);
     ui->MF_selectAllBox->blockSignals(true);
+    ui->MF_selectTrailerBox->blockSignals(true);
     if(item->column() == 0)
     {
         int selectedSectors = 0;
@@ -278,34 +330,40 @@ void MainWindow::on_MF_dataWidget_itemChanged(QTableWidgetItem *item)
         if(selectedSectors == 0)
         {
             ui->MF_selectAllBox->setCheckState(Qt::Unchecked);
+            ui->MF_selectTrailerBox->setCheckState(Qt::Unchecked);
         }
         else if(selectedSectors == mifare->cardType.sector_size)
         {
             ui->MF_selectAllBox->setCheckState(Qt::Checked);
+            ui->MF_selectTrailerBox->setCheckState(Qt::Checked);
         }
         else
         {
             ui->MF_selectAllBox->setCheckState(Qt::PartiallyChecked);
+            ui->MF_selectTrailerBox->setCheckState(Qt::PartiallyChecked);
         }
     }
     else if(item->column() == 1)
     {
         int selectedSubBlocks = 0;
         int selectedBlocks = 0;
+        int selectedTrailers = 0;
 
         for(int i = 0; i < mifare->cardType.block_size; i++)
         {
             if(ui->MF_dataWidget->item(i, 1)->checkState() == Qt::Checked)
-            {
                 selectedBlocks++;
-            }
         }
         for(int i = 0; i < mifare->cardType.blk[Mifare::data_b2s(item->row())]; i++)
         {
             if(ui->MF_dataWidget->item(i + mifare->cardType.blks[Mifare::data_b2s(item->row())], 1)->checkState() == Qt::Checked)
-            {
                 selectedSubBlocks++;
-            }
+        }
+        for(int i = 0; i < mifare->cardType.sector_size; i++)
+        {
+            int targetBlock = mifare->cardType.blks[i] + mifare->cardType.blk[i] - 1;
+            if(ui->MF_dataWidget->item(targetBlock, 1)->checkState() == Qt::Checked)
+                selectedTrailers++;
         }
         if(selectedBlocks == 0)
         {
@@ -331,6 +389,18 @@ void MainWindow::on_MF_dataWidget_itemChanged(QTableWidgetItem *item)
         {
             ui->MF_dataWidget->item(mifare->cardType.blks[Mifare::data_b2s(item->row())], 0)->setCheckState(Qt::PartiallyChecked);
         }
+        if(selectedTrailers == 0)
+        {
+            ui->MF_selectTrailerBox->setCheckState(Qt::Unchecked);
+        }
+        else if(selectedTrailers == mifare->cardType.sector_size)
+        {
+            ui->MF_selectTrailerBox->setCheckState(Qt::Checked);
+        }
+        else
+        {
+            ui->MF_selectTrailerBox->setCheckState(Qt::PartiallyChecked);
+        }
     }
     else if(item->column() == 2)
     {
@@ -347,6 +417,7 @@ void MainWindow::on_MF_dataWidget_itemChanged(QTableWidgetItem *item)
     }
     ui->MF_dataWidget->blockSignals(false);
     ui->MF_selectAllBox->blockSignals(false);
+    ui->MF_selectTrailerBox->blockSignals(false);
 }
 
 void MainWindow::on_MF_keyWidget_itemChanged(QTableWidgetItem *item)
@@ -691,6 +762,7 @@ void MainWindow::MF_widgetReset()
     ui->MF_dataWidget->blockSignals(true);
     ui->MF_keyWidget->blockSignals(true);
     ui->MF_selectAllBox->blockSignals(true);
+    ui->MF_selectTrailerBox->blockSignals(true);
 
     for(int i = 0; i < blks; i++)
     {
@@ -710,10 +782,12 @@ void MainWindow::MF_widgetReset()
         ui->MF_dataWidget->item(mifare->cardType.blks[i], 0)->setCheckState(Qt::Checked);
     }
     ui->MF_selectAllBox->setCheckState(Qt::Checked);
+    ui->MF_selectTrailerBox->setCheckState(Qt::Checked);
 
     ui->MF_dataWidget->blockSignals(false);
     ui->MF_keyWidget->blockSignals(false);
     ui->MF_selectAllBox->blockSignals(false);
+    ui->MF_selectTrailerBox->blockSignals(false);
 }
 // ************************************************
 

ui/mainwindow.h

@@ -146,6 +146,8 @@ private slots:
 
     void on_MF_trailerDecoderButton_clicked();
 
+    void on_MF_selectTrailerBox_stateChanged(int arg1);
+
 private:
     Ui::MainWindow* ui;
     QButtonGroup* typeBtnGroup;
@@ -153,6 +155,7 @@ private:
     QLabel* programStatusBar;
     QLabel* PM3VersionBar;
     QAction* myInfo;
+    QAction* checkUpdate;
     QSettings* settings;
 
     void uiInit();

ui/mainwindow.ui

@@ -201,24 +201,31 @@
               <property name="text">
                <string>Select All</string>
               </property>
-              <property name="tristate">
-               <bool>false</bool>
-              </property>
              </widget>
             </item>
             <item>
              <widget class="QCheckBox" name="MF_selectTrailerBox">
-              <property name="minimumSize">
-               <size>
-                <width>40</width>
-                <height>0</height>
-               </size>
-              </property>
               <property name="text">
                <string>Select Trailer</string>
               </property>
              </widget>
             </item>
+            <item>
+             <spacer name="verticalSpacer_3">
+              <property name="orientation">
+               <enum>Qt::Vertical</enum>
+              </property>
+              <property name="sizeType">
+               <enum>QSizePolicy::Fixed</enum>
+              </property>
+              <property name="sizeHint" stdset="0">
+               <size>
+                <width>20</width>
+                <height>20</height>
+               </size>
+              </property>
+             </spacer>
+            </item>
             <item>
              <widget class="QPushButton" name="MF_data2KeyButton">
               <property name="minimumSize">
@@ -530,12 +537,6 @@
                  <verstretch>0</verstretch>
                 </sizepolicy>
                </property>
-               <property name="minimumSize">
-                <size>
-                 <width>40</width>
-                 <height>0</height>
-                </size>
-               </property>
                <property name="text">
                 <string>Check Default</string>
                </property>
@@ -660,7 +661,7 @@
                 <widget class="QComboBox" name="MF_RW_keyTypeBox">
                  <property name="minimumSize">
                   <size>
-                   <width>35</width>
+                   <width>45</width>
                    <height>0</height>
                   </size>
                  </property>