Update tutorial

pull/33/head
wh201906 3 years ago
parent ff3a43a4a6
commit a2d63b5cdc

@ -41,5 +41,26 @@
(3) You might need to change "\<port\>" to "/dev/\<port\>" in "Settings"->"Start arguments" editbox
![](args_linux.png)
(4) If you are using Raspbian(Raspberry OS), you might need to check "Keep the client active even the PM3 hardware is disconnected." in the "Steeings" panel
![](keep.png)
(4) If you are using Raspbian(Raspberry OS), you might need to check "Keep the client active even the PM3 hardware is disconnected." in the "Settings" panel
![](keep.png)
## About preload script
The client might refer to some environment variables to load dependencies
For example, the RRG client on Windows requires these environment variables
```
QT_PLUGIN_PATH=<client path>\libs\
QT_QPA_PLATFORM_PLUGIN_PATH=<client path>\libs\
PATH=<client path>\libs\;<client path>\libs\shell\;<old PATH variable>
MSYSTEM=MINGW64
```
So the GUI will run "\<client path\>\\setup.bat" before loading the client, which will set the environment variables to the client properly. The script will not affect the system environment variables.
The contents of setup.bat are as follows
```
@echo off
set "HOME=%~dp0"
set "QT_PLUGIN_PATH=%HOME%\libs\"
set "QT_QPA_PLATFORM_PLUGIN_PATH=%QT_PLUGIN_PATH%"
set "PATH=%QT_PLUGIN_PATH%;%QT_PLUGIN_PATH%shell\;%PATH%"
set MSYSTEM=MINGW64
```
You can write your own script by referring to it if you need other client, then input the script path in the "Preload script path" editbox.

@ -46,4 +46,26 @@
![](args_linux_zh_CN.png)
(4) 若使用树莓派Raspbian系统且连接成功若干秒后PM3会自动断开则需要在“设置”面板中勾选“在PM3断开后保持客户端运行”
![](keep_zh_CN.png)
![](keep_zh_CN.png)
## 预加载脚本
客户端在运行时可能需要使用某些环境变量以解决依赖问题
例如Windows平台下的冰人客户端运行时需要以下环境变量
```
QT_PLUGIN_PATH=<客户端路径>\libs\
QT_QPA_PLATFORM_PLUGIN_PATH=<客户端路径>\libs\
PATH=<客户端路径>\libs\;<客户端路径>\libs\shell\;<原PATH变量>
MSYSTEM=MINGW64
```
因此GUI会在加载客户端之前先运行"\<客户端路径\>\\setup.bat",从而在加载客户端时使用正确的环境变量。这些设置不会影响系统环境变量,仅对客户端本身有效
setup.bat的内容如下
```
@echo off
set "HOME=%~dp0"
set "QT_PLUGIN_PATH=%HOME%\libs\"
set "QT_QPA_PLATFORM_PLUGIN_PATH=%QT_PLUGIN_PATH%"
set "PATH=%QT_PLUGIN_PATH%;%QT_PLUGIN_PATH%shell\;%PATH%"
set MSYSTEM=MINGW64
```
如果需要使用其它客户端,你可以参考此文件编写自己的脚本,然后将其填入“预加载脚本路径”当中
Loading…
Cancel
Save